AEMC Simple Logger II User Manual page 8

1.800.561.8187
Simple Logger II Model L432 ........................................ Cat. #2126.07
®
Includes USB cable, one 4-position terminal block connector, DataView
AA alkaline batteries and quick start guide.
Simple Logger ® II Model L481 ........................................ Cat. #2126.25
DC
Includes USB cable, DataView ® software, 2x1.5V AA alkaline batteries, one set of leads, one
set of alligator clips and quick start guide.
Simple Logger II Model L562 ........................................ Cat. #2126.35
®
Includes USB cable, DataView ® software, 2x1.5V AA alkaline batteries, one set of leads, one
set of alligator clips and quick start guide. Probes purchased separately.
Simple Logger ® II Model L642 ........................................ Cat. #2126.08
Includes USB cable, Thermocouple - Flexible (1M), K Type, -58° to 480° F, DataView
software, 2x1.5V AA alkaline batteries and quick start guide.
Simple Logger ® II Model L702 ........................................ Cat. #2126.09
Includes USB cable, DataView ® software, 2x1.5V AA alkaline batteries and quick start guide.
Simple Logger II Model ML912 ..................................... Cat. #2126.37
®
Includes USB cable, DataView software, 2x1.5V AA alkaline batteries and quick start guide.
®
(24A-100mV/A, 240A-10mV/A, BNC)
NOTE: The MN261 current probe should not be used on applications above
10 or 100A (depending on range) when used with either the L101 or L102 data
loggers. Clipping of the input signal could result.
(10A-100mV/A, 100A-10mV/A, 1000A-1mV/A, BNC)
(30A-10mV/A, 300A-1mV/A, 3000A-0.1mV/A, BNC)
(5A-200mV/A; 100A-10mV/A, Lead)
www.
DC
®
AC
............................................. Cat. #2115.82
.......................... Cat. #2113.49
........................... Cat. #2110.90
............................................... Cat. #2153.01
.com
software, 2x1.5V
®
®
information@itm.com