Show Mode - ADJ THEATRIX PRO 48 LED User Instructions

Theatrix PRO 48 LED

Show Mode

- Show modes 0 - 8 (Factory programs).
1. Tap the MENU button until "Show Mode" is displayed, press
ENTER.
2. "Show X" will now be displayed, "X" representing a number
between 1-8. Programs 1-8 are factory programs, while "Show
0" is random program. You can also choose "Auto Fade" which
is Auto Fade mode. Press the UP or DOWN buttons to find your
desired show and press ENTER to confirm.
3. The display will now show "Speed X". Press the UP or DOWN
buttons to set the speed of your desired show. You can only
adjust the speed of shows 1-8 and the Auto Fade show, and
the speed adjustment rate is 1-3 as well. Choose the speed and
press ENTER to confirm.
Slave Mode -
This will let you set unit as a master or
slave in a master/slave configuration.
1. Tap the MENU button until "Slave Mode" is displayed, press
ENTER. Either "Slave 1" or "Slave 2" will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim.
NotE: In a Master/Slave configuration you can make one fix-
ture the Master and then set the next fixture to "Slave 2", the
fixtures will now have contrast movement to each other.
Sound State
- In this mode the unit will run in sound
active mode.
1. Tap the MENU button until "Sound State" is displayed, press
ENTER.
2. Either "On" or "Off" will now be displayed. Press the UP or
American DJ Supply - www.americandj.com - Theatrix PRO 48 LED User Manual Page 9
© ®
System Menu Theatrix PRO 48 LED
DOWN buttons to select one or the other.
Sound Sense
sensitivity of the sound active mode.
1. Tap the MENU button until "Sound Sense" is displayed, press
ENTER.
2. Press the UP or DOWN buttons to adjust the sensitivity level.
The sensitivity level can be adjusted between 0 (the lowest) and
100 (most sensitive).
3. Press ENTER to set you desired level.
Black Out
1. Tap the MENU button until "Black Out" is displayed, press
ENTER.
2. Either "Yes" or "No" will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3. Press ENTER, and then press and hold the MENU button
least three seconds
Back Light
light automatically turn off after one minute.
1. Tap the MENU button until "Back Light" is displayed, press
ENTER.
2. Either "On" or "Off" will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3. Press ENTER, and then press and hold the MENU button
least three seconds
American DJ Supply
©
- In this mode you can adjust the sound
- This will control blackout
to confirm.
- With this function you can make the back-
to confirm.
- www.americandj.com - Theatrix PRO 48 LED User Manual Page 10
®
System Menu
for at
for at