Scan - Sony DSR-250 Operating Instructions Manual

Searching for a photo – Photo search/Photo scan
Searching for a photo without using cassette memory
(1) Set the MEMORY/CAMERA/VTR selector to VTR.
(2) Set CM SEARCH in
(3) Press SEARCH MODE on the Remote Commander repeatedly, until the photo
search indicator appears.
The indicator changes as follows:
INDEX SEARCH t DATE SEARCH t PHOTO SEARCH t PHOTO SCAN
t no indicator
(4) Press . or > on the Remote Commander to select a photo for playback.
Each time you press . or >, your camcorder searches for the previous or
next photo.
Your camcorder automatically starts playback of the photo.
To stop searching
Press x.
Scanning photo
(1) Set the MEMORY/CAMERA/VTR selector to VTR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the photo
scan indicator appears.
The indicator changes as follows:
INDEX SEARCH t TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
t PHOTO SCAN t no indicator
(3) Press . or > on the Remote Commander.
Each photo is played back for about five seconds automatically.
2
SEARCH
MODE
3
To stop scanning
Press x.
to OFF in the menu settings (p. 120).
PHOTO 00

SCAN

1
MEMORY
CAMERA
VTR
83