Viewing The Recording On A Monitor - Sony DSR-250 Operating Instructions Manual

Viewing the recording on a monitor

Connect your camcorder to your monitor or VCR with the A/V connecting cable to
watch the playback picture on the monitor screen. You can operate the video control
buttons in the same way as when you monitor playback pictures on the LCD screen.
Refer to the operating instructions of your monitor or VCR.
: Signal flow
If your monitor is connected to a VCR
Connect your camcorder to the line input on the VCR by using the A/V connecting
cable. Set the input selector on the VCR to LINE.
If your monitor or VCR is a monaural type
Connect with the monitor or VCR using the audio cable (monaural y stereo) (not
supplied).
If your monitor or VCR has a BNC-type connector for video input
Connect it to the VIDEO OUT connector on the side of the camcorder using a cable with
BNC connectors. In this connection, you need not connect the S video cable nor the
yellow (video) plug of the A/V connecting cable.
If your monitor or VCR has an S video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures. With this
connection, you do not need to connect the yellow (video) plug of the A/V connecting
cable. Connect the S video cable (not supplied) to the S video jacks on both your
camcorder and the monitor or the VCR. This connection produces higher quality
DVCAM/DV format pictures.
When you adjust the monitor screen
Set the MEMORY/CAMERA/VTR selector to CAMERA, and set COLOR BAR to ON in
the menu settings (p. 120). The color bars are displayed on the monitor screen.
(not supplied)
Yellow
VIDEO
OUT
White
(not supplied)
S VIDEO
VIDEO IN/OUT
AUDIO IN/OUT
CH-1/CH-2
IN
S VIDEO
VIDEO
AUDIO
Red
MONITOR
35