Frame By Frame Recording - Cut Recording - Sony DSR-250 Operating Instructions Manual

Frame by frame recording – Cut recording
You can make a recording with a stop-motion animated effect using cut recording. To
create this effect, alternately move the subject a little and make a cut recording. We
recommend that you use a tripod, and operate the camcorder using the Remote
Commander after step 6.
(1) Push the CUSTOM PRESET/MENU switch in the MENU direction and release
(2) Turn the SEL/PUSH EXEC dial to select
(3) Turn the SEL/PUSH EXEC dial to select FRAME REC, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(5) Push the CUSTOM PRESET/MENU switch in the MENU direction and release
(6) Press START/STOP to start cut recording. The camcorder makes a recording
(7) Move the subject, and repeat step 6.
1
6,7
5
To cancel the cut recording
•Set FRAME REC to OFF in the menu settings.
•Set the MEMORY/CAMERA/VTR selector to VTR or MEMORY.
Notes on cut recording
•The last recorded cut is longer than other cuts.
•The proper remaining tape time is not indicated if you use this function continuously.
•You cannot mark an index during cut recording.
If you set INT. REC to ON in standby mode
The cut recording will be canceled.
76
it to display the menu in standby mode.
it to erase the menu display.
The FRAME REC indicator lights up.
for about six frames, and returns to recording standby.
FRAME REC
, then press the dial.
2-4
CAMERA SET
D ZOOM
16 : 9W I DE
STEADYSHOT
FRAME REC
I NT. REC
CAMERA SET
D ZOOM
16 : 9W I DE
[ MENU ] : END
STEADYSHOT
FRAME REC OFF
I NT. REC ON
RETURN
CAMERA SET
D ZOOM
16 : 9W I DE
[ MENU ] : END
STEADYSHOT
FRAME REC
I NT. REC
RETURN
[ MENU ] : END
ON