Sony DSR-250 Operating Instructions Manual page 70

Using special effects – Digital effect
(1) In standby or recording mode, press DIGITAL EFFECT. The digital effect
(2) Turn the SEL/PUSH EXEC dial to select the desired digital effect mode.
(3) Press the SEL/PUSH EXEC dial. The indicator lights up and the bar appears.
(4) Turn the SEL/PUSH EXEC dial to adjust the effect.
Items to be adjusted
STILL
FLASH
LUMI.
TRAIL
OLD MOVIE
The longer the bar on the screen, the stronger the digital effect. The bar appears in the
following modes: STILL, FLASH, LUMI. and TRAIL.
1
2
To cancel the digital effect
Press DIGITAL EFFECT. The digital effect indicator disappears.
Notes
•The following functions do not work in digital effect mode:
– Fader
– Tape Photo recording
– Shutter speed (1/30 or smaller) adjustment
•The following functions do not work in old movie mode:
– Wide mode
– Spot light mode
When you manually adjust the shutter speed
OLD MOVIE will be automatically canceled.
When you turn the power off
70
Digital effect will be automatically canceled.
indicator appears.
The digital effect indicator changes as follows:
STILL y FLASH y LUMI. y TRAIL y OLD MOVIE
In STILL and LUMI. modes, the still image is stored in memory.
The rate of the still image you want to superimpose on the
moving picture
The interval of flash motion
The color scheme of the area in the still image which is to be
swapped with a moving picture
The time until the incidental image vanishes
No adjustment necessary
DIGITAL EFFECT
LUMI.
3
LUMI.
4