Viewing A Still Picture - Memory Photo Playback - Sony DSR-250 Operating Instructions Manual

Viewing a still picture – Memory Photo
playback
You can play back still images recorded on a "Memory Stick." You can also play back
six images at a time by selecting the index screen.
Before operation
Insert a "Memory Stick" into your camcorder.
(1) Set the MEMORY/CAMERA/VTR selector to VTR or MEMORY.
(2) Press MEMORY PLAY. The last recorded image is displayed.
(3) Press MEMORY +/– or +/– on the Remote Commander to select the desired
still image. To see the previous image, press MEMORY – or – on the Remote
Commander. To see the next image, press MEMORY + or + on the Remote
Commander.
MEMORY
1
CAMERA
To stop memory photo playback
Press MEMORY PLAY again.
To play back recorded images on a monitor screen
•Connect your camcorder to the monitor with the A/V connecting cable before
operation.
•When operating memory photo playback on a monitor or on the LCD screen, the
image quality may appear to have deteriorated. This is not a malfunction. The image
data is as good as ever.
•Turn the audio volume of the monitor down before operation, or noise (howling) may
be output from the TV speakers.
When no images are recorded on the "Memory Stick"
The message "
Image data modified with personal computers or shot with other equipment
You may not be able to play them back with your camcorder.
Note on the date/time indicator
Recording date/time is not displayed, however, it is automatically recorded on the
"Memory Stick." You can check the recording date/time while in memory playback
mode by pressing DATA CODE.
142
VTR
NO FILE" appears.
2
PLAY
3