Sony DSR-250 Operating Instructions Manual page 92

Dubbing only desired scenes – Digital program editing
(6) Press the SEL/PUSH EXEC dial, or MARK on the Remote Commander.
(7) Search for the end of the first scene you want to insert using the video control
(8) Press the SEL/PUSH EXEC dial, or MARK on the Remote Commander.
(9) Repeat steps 5 to 8, then set PROGRAM.
7
STOP REW
On a blank portion of the tape
You cannot set CUT-IN or CUT-OUT on a blank portion of the tape.
Erasing the last program
To change the end of the last program, delete the CUT-OUT mark.
To erase the whole program, delete both the CUT-IN and CUT-OUT marks.
(1) Turn the SEL/PUSH EXEC dial to select UNDO, then press the dial.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
To cancel erasing
Select RETURN in step 2, then press the SEL/PUSH EXEC dial.
92
The CUT-IN point of the first program is set, and the top part of the program
mark changes to light blue.
buttons, then pause playback (p. 33).
The CUT-OUT point of the first program is set, then the bottom part of the
program mark changes to light blue.
When the program is set, the program mark changes to light blue.
You can set a maximum of 20 programs.
PLAY FF PAUSE SLOW
The last set program mark flashes, then the setting is canceled.
6
8,9
V I DEO ED I T 00:09:07:06
MARK 2 I N
UNDO
ERASE ALL
START
SCENE 1
[ MENU ] : END
V I DEO ED I T 00:08:55:06
MARK 1 OUT
UNDO
ERASE ALL
START
SCENE 0
[ MENU ] : END
V I DEO ED I T 00:10:01:23
MARK 4 I N
UNDO
ERASE ALL
START
SCENE 3
[ MENU ] : END