Table of Contents
Advertisement
MSP430FR2355 Interface Firmware
7 MSP430FR2355 Interface Firmware
The MSP430FR2355 on the MCT8329EVM comes pre-programmed with the firmware necessary for
communicating with the PC GUI and the MCT8329. In order to reprogram or flash custom code on the
MSP430FR2355, you will need an external MSP430 LaunchPad
this example, we use the
the steps below to download the code for the MCT8329EVM to use with the GUI.
7.1 Downloading Code Composer Studio and Importing MSP430FR2355 Interface Firmware
Code
1. Extract the "MCT8329EVM_MSP430FR2355_Firmware_GUI.zip" to a location on the computer.
2. Download the latest version of
C:\ti.
a. Accept all agreements, default install locations, and hit Next to proceed through menus.
b. In the Select Components window, make sure to check MSP430 Low-Power MCUs to install the required
packages for the MSP430 LaunchPad Evaluation Kits.
3. After installing, run CCS and select a folder or the default to use as the Workspace to store any new
projects. The location and naming convention can be changed based on the user's preference. Click the OK
button to accept.
4. In CCS, click on the Project tab and select Import CCS Projects. Click on Browse.
5. Select the MCT8329EVM_MSP430FR2355_Firmware_GUI folder installed from step 1.
6. Import the project MCT8329EVM_MSP430FR2355_Firmware_GUI into your workspace as shown in
7-1.
Figure 7-1. MSP430FR2355 Interface Firmware Code in Code Composer Studio
12
MCT8329EVM Evaluation Module
MSP-EXP430FR2355 LaunchPad Development Kit
Code Composer
Copyright © 2023 Texas Instruments Incorporated
™
that includes the eZ-FET Debug Probe. In
to provide the debug probe. Follow
Studio. This download sets up a ti folder in the directory
SLLU359A – DECEMBER 2022 – REVISED MAY 2023
www.ti.com
Figure
Submit Document Feedback
Advertisement
Table of Contents
