Table of Contents
Advertisement
How to assemble your monitor hardware
• If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. Available input and output jacks may vary depending on the
purchased model.
• The supported timing may vary by input signal. Download
on page
3). Refer to "
• Avoid finger pressure on the screen surface.
Be careful when handling the sharp monitor base and protect yourself from any physical harm.
Your monitor comes with a curved screen and the screen
surface should never be placed on the desk without a
cushion underneath.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse
will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor around on
your desk will scratch or damage the monitor surround and controls.
Open the box, and take out the monitor stand and base.
" in
Preset display modes
Resolution file
for more information.
Resolution file
Never stand your monitor on a desk or floor without its
stand arm and base. The controls on the bottom of the
front bezel are not designed to hold the weight of the
monitor and may be damaged.
17
from the website (see
Product support
Advertisement
Table of Contents
