Electrical & Water Connection - Blodgett ZEPHAIRE-100-G-ES Installation Operation & Maintenance

Hide thumbs Also See for ZEPHAIRE-100-G-ES:
Table of Contents

Advertisement

ELECTRICAL CONNECTION
Wiring diagrams are located in the control compartment
and on the back of the oven.
This oven is supplied for connection to 115 volt grounded
circuits. The electric motor, indicator lights and related
switches are connected through the 6' electric supply cord
found at the rear of the oven.
WARNING!!
This appliance is equipped with three prong
grounding type plug for your protection
against shock hazard and should be plugged
directly into a properly grounded three prong
receptacle. DO NOT cut or remove the ground-
ing prong from this plug.
The Blodgett Oven Company cannot assume responsi-
bility for loss or damage suffered as a result of improper
installation.
ELECTRICAL SPECIFICATIONS - ZEPHAIRE-100-G-ES AND ZEPHAIRE-200-G-ES
Hz
60
Volts
Phase
115
Electrical & Water Connection
WATER CONNECTION FOR OPTIONAL SPRITZER
1. Connect the water source to the 3/4" female garden
hose connection on the back of the oven.
2. The oven should be installed with backflow preven-
tion in accordance with federal, state and local codes.
Amps
1
8
13
Installation
Figure 10
Electrical Connection
(minimum size)
Cord set provided

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zephaire-200-g-es

Table of Contents