Table of Contents
Advertisement
STANDARDS AND CODES
THE
INSTALLATION
TAINED HEREIN ARE FOR THE USE OF QUALI-
FIED INSTALLATION AND SERVICE PERSONNEL
ONLY. INSTALLATION OR SERVICE BY OTHER
THAN QUALIFIED PERSONNEL MAY RESULT IN
DAMAGE TO THE OVEN AND/OR INJURY TO
THE OPERATOR.
Qualified installation personnel are individuals, a
firm, a corporation, or a company which either in
person or through a representative are engaged
in, and responsible for:
the installation of electrical wiring from the elec-
D
tric meter, main control box or service outlet to
the electric appliance.
Qualified installation personnel must be experi-
enced in such work, familiar with all precautions
required, and have complied with all requirements
of state or local authorities having jurisdiction.
U.S. and Canadian installations
Installation must conform with local codes, or in
the absence of local codes, with the National Elec-
trical Code, ANSI/NFPA 70 ---Latest Edition and/or
Canadian National Electric Code C22.2 as applica-
ble.
General export installations
Installation must conform with Local and National
installation standards. Local installation codes
and/or requirements may vary. If you have any
questions regarding the proper installation and/or
operation of your Blodgett oven, please contact
your local distributor. If you do not have a local dis-
tributor, please call the Blodgett Oven Company at
0011-802-860-3700.
INSTRUCTIONS
CON-
Installation
ELECTRICAL CONNECTION
Ovens are supplied for operation on 208 volt or
220-240 volt installation. The electric motor, indi-
cator lights and related switches are intercon-
nected through the one power source supplied to
the oven.
Wiring diagrams are located in the control com-
partment area and included at the back of this
manual.
The supply enters through the rear of the oven and
electrical connection is made to the terminal block
secured to the mounting panel in the control com-
partment. Electrical connection sizes for the oven
are shown in the "Electrical Connection AWG" col-
umn of the Electrical Specifications section in this
manual. Wiring is sized for 60_C copper wire at
125% of rated input. Reference is from the National
Electric Code ANSI/NFPA 70-1987.
5
Electrical Connection
Advertisement
Table of Contents
