Soleus Air KFHHP-12 Manual page 17

Operation procedures/pictures
Disassembling the electric box
7.1.7
Screw off the two pieces of screws that fix the electric
box and unloose the clasp. Pull out the tube sensor,
unloose the grounding nut and unplug the motor
connecting terminal take out the electric box.
As shown in Fig 7-8
|||||||||
Disassembling the evaporator assy
7.1.8
Screw off the screws that fix the evaporator, one piece
on the left and two pieces on the right. As shown in Fig
7-9, 7-10
Lift the left end of the evaporator slightly upward with
your end and push it rearward to let out the side clasps
of the evaporator from the groove. Take out the
evaporator carefully and pay attention to protecting the
connecting pipe.
Disassembling the motor
7.1.9
Screw off the 3 pieces of screws that fix the motor
clamp to take off the motor clamp. As shown in Fig.7-
11
Screw off the fixing nut that fixes the cross flow fan to
pull out the motor from the cross flow fan. As shown in
Fig.7-12
Disassembling the cross flow fan
7.1.10
Refer to the above steps to take out the cross flow fan
from the base plate after taking out the motor.
Tube sensor
Grounding nut
Motor connecting
Screw
Screws
Right motor
clamp
screws
motor
cross flow fan
s
21
Screws
terminal
Fig 7-8
Fig 7-9
Fig 7-10
Screws
Fig 7-11
Fig 7-12