Olivetti d-Copia 283MF Operation Manual page 407

Precautions for Handling the Memory Module
Installing the Memory Module
OPERATION GUIDE
NOTE:
The expansion memory should only be installed
by your service technician. We shall not be liable for any
damages caused by improper installation of expansion
memory .
Correct
To protect electronic parts, discharge static
electricity from your body by touching a water pipe
(faucet) or other large metal object before handling
the memory module. Or, wear an antistatic wrist
strap, if possible, when you install the memory
module.
1
Turn off the machine and disconnect the power
cord and interface cable.
2
Remove the right cover with a piece of metal similar
to coin.
3
Remove the screws and the memory slot cover as
shown in the figure
Incorrect
.
Appendix-3