Olivetti d-Copia 283MF Operation Manual page 382

Management
Managing Accounts
This section explains how to add a new account. The following entries are required.
Account Name
Account ID
Restriction
Use the procedure below to register a new account.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
Sys. Menu/Count.:a b
4
User/Job Account
*********************
5
User Property
6
Common Settings
Login User Name
*******************
Login Password:
[ Menu
User/Job Account:a b
1
User Login Set.
2
Job Account.Set.
*********************
3 Unknown ID Job
11-16
Item
Enter the account name (up to 32 characters).
Enter the account ID as many as eight digits
(between 0 and 99999999).
This Prohibits printing/scanning or restricts the
number of sheets to load. Refer to Restricting the
Use of the Machine on page 11-22.
[ Exit
L b
] [ Login
[ Exit
Description
1
Press the System Menu/Counter key on the main
unit operation panel.
2
In the Sys. Menu/Count. menu, press the
key to select [User/Job Account], and then press
the OK key.
]
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-6 for
the default login user name and password.
]
NOTE:
If [Netwk Authentic.] is selected as the user
authentication method, press [Menu] (the Left Select
key) to select the authentication destination.
4
In the User/Job Account menu, press the
key to select [Job Account. Set.].
]
or
or
OPERATION GUIDE