Olivetti d-Copia 283MF Operation Manual page 265

FormFeed Timeout
Receiving print data from the computer, the machine may sometimes wait if there is no information signalling
that the last page does not have any more data to be printed. When the preset timeout passes, the machine
automatically prints paper. The options are between 5 and 495 seconds.
Use the procedure below to set the form feed timeout.
Sys. Menu/Count.:a b
7
Copy
8
********************* Printer
9 Send
Printer:
1 Emulation Set.
*********************
2
EcoPrint
3 Override A4/LTR
FormFeed
LF Action
Set the line feed action when the machine receives the line feed code (character code 0AH). The table below
shows the available settings. The default setting is LF Only.
LF Only
LF and CR
OPERATION GUIDE
[ Exit ]
a b
[ Exit ]
TimeOut:* b
(5 - 495)
******30*Sec.
Item
Only line feed performed.
Line feed and character return performed.
Default Setting (System Menu)
1
In the Sys. Menu/Count. menu, press the
key to select [Printer].
2
Press the OK key. The Printer menu appears.
3
Press the or key to select [FormFeed
Timeout].
4
Press the OK key. FormFeed Timeout appears.
5
Press the or key to set the Form Feed
Timeout. You can set the timeout delay in seconds.
You cannot use the numeric keys to enter this
value.
6
Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Description
or
8
8-77