Send as E-mail
Sends a scanned original image as an E-mail attachment.
NOTE:
•
You must have a network environment in which this machine can connect to a mail server. It is
recommended that the machine be used in an environment in which it can connect to the mail server at any
time over a LAN.
•
Access the COMMAND CENTER beforehand and specify the settings required for sending e-mail. For
details, see COMMAND CENTER (Settings for E-mail) on page 2-25.
•
Refer to Character Entry Method on Appendix-5 for details on entering characters.
Send to:
1
p E-mail
*********************
2
G Folder(SMB)
3
H Folder(FTP)
Address Entry:
*
Ready to send.
p :sally@OlivettiN
1-sided
[ Duplex ] [ScanRes.]
OPERATION GUIDE
1
2
a b
3
B b
ABC
[ Text
]
4
NOTE:
Address Book or the One-touch keys. Refer to
Specifying Destination on page 3-28.
5
Dest.:
1
NOTE:
300x300dpi
destination (page 8-64) is set to [On], a screen to
confirm the entered e-mail address appears. Enter the
same e-mail address again and press the OK key.
Press the Send key.
Displays the screen for sending.
Press the
or
key to select [E-mail].
Press the OK key. Address Entry appears.
Enter the destination e-mail address.
Destination can be specified using the
Press the OK key. Completed. is displayed and the
screen returns to the basic screen.
If the screen for confirming the entry of a new
Basic Operation
3
3-21