Olivetti d-Copia 283MF Operation Manual page 273

Send Result Report
Automatically print a report of transmission result when a transmission is complete. The table below shows the
available settings. The default setting is Error Only.
Off
On
Error Only
Use the procedure below to send a Result Report.
Sys. Menu/Count.:a b
1 Report
*********************
2 Counter
3
System
Report:
1 Report Print
*********************
2 Admin Rpt Set.
3
Result Rpt Set.
Result Rpt Set.: a b
1
********************* Send Result
2 FAX RX Result
3
JobFinish Notice
OPERATION GUIDE
Item
No result report printed.
Result report automatically printed.
Transmitted images can also be attached.
Result report printed only when a
transmission ends in an error. If two or
more destinations are registered, the
reports are printed only for the destinations
with the errors. Transmitted images can
also be attached.
[ Exit ]
a b
[ Exit ]
[ Exit ]
Default Setting (System Menu)
Description
1
In the Sys. Menu/Count. menu, press the
key to select [Report].
2
Press the OK key. The Report menu appears.
3
Press the or key to select [Result Rpt Set.].
4
Press the OK key. The Result Rpt Set. menu
appears.
or
8
8-85