Olivetti d-Copia 283MF Operation Manual page 108

Basic Operation
Dest. Confirm.:
H OSAKA SD
*********************
G EI5
G PT10
3-26
13
14
a b
[ Exit ]
15
NOTE:
before transmission (page 8-64) is set to [On], the
Confirm Destination screen appears when the Start
key is pressed. For more information, refer to Confirm
Destination Screen on page 3-27.
If the connection is successful, Connected. is
displayed on the screen. Press [OK] (the Right
Select key). Completed. is displayed and the
screen returns to the basic screen.
If the connection failed, Cannot connect. is
displayed. Press [OK] (the Right Select key). The
screen shown in step 3 reappears. Check and re-
enter the destination.
If there are additional destinations, press the Add
Destination key. Repeat steps 2 to 12 to enter
additional destinations. Up to 100 destinations can
be specified.
Press the Confirm Destination key to confirm the
registered destinations.
Press the or key to select a destination and
press the OK key. Then, you can edit or delete the
destination.
Press [Exit] (the Right Select key) to return to the
basic screen.
Press the Start key. Transmission starts.
If the screen for confirming the destination
OPERATION GUIDE