Configuring Your Router - Sling Media Slingbox User Manual

Configuring your Router

If you enabled remote viewing in the previous screen, you need to configure your router.
To watch your Slingbox remotely, a "port" must be opened on your router. Opening a port is
often called "port forwarding." When opened, a port allows access to a device on your local
network (Slingbox) from outside.
There are three ways to set up your router from this screen. Choose the one that best fits your
needs.
• Fully-Automatic UPnP works great if you'd rather have SlingPlayer take care of the router
setup for you.
• Semi-Automatic UPnP attempts to use UPnP but gives you the option of assigning your
own IP address and port number.
• Manual Router Setup. If you select manual, you need to assign an IP address and port
number that Slingbox will use. This is an advanced feature, and should only be used if you
know how to assign these options.
Important
Ensure UPnP is enabled on your router. Though many routers support this, this
option is usually disabled.
Slingbox User Guide
Remote Viewing Setup
41