Sling Media Slingbox User Manual page 36

TV Tuner Setup
If you chose Internal Tuner in the Video Selection screen, you need to select the TV source.
Slingbox also scans and makes a list of all the available channels from the selected source.
1. Select the source connected to your Slingbox.
• Antenna. This refers to the metallic device that can receive signals transmitted by a TV
station. It is also known as an aerial or rabbit ears.
• Cable. This cable refers to the analog cable connection that does not include a set-top
box.
2. Click Scan TV Channels. You will need to wait for a few seconds while Slingbox
determines the available channels. You'll see the progress as Slingbox cycles through all
possible channels. After the scan, Slingbox will display the number of channels found.
3. Click Next to view the lineup.
4. You can manually adjust the tuned frequency of a channel, by selecting the channel and
clicking either Tune Up or Tune Down.
If you want to exclude a channel, clear the corresponding Ch. selection box.
If you want to revert to the original settings, click Back, and click Scan TV Channels.
Click Next.
5. Click Next to save your settings and then click Finish.
32
Installing SlingPlayer
Slingbox User Guide