Sling Media Slingbox User Manual page 34

Audio/Video Settings
The default audio and video settings are typically ideal for most computers when watching
your TV using SlingPlayer. However, for the best possible viewing experience, the audio and
video signal from your television source or other A/V device may need a slight adjustment
when you watch your Slingbox.
Note
You can adjust these settings can only after installing SlingPlayer. To access this
screen, select Properties from the Slingbox menu, and then select Audio/
Video Setup from the Slingbox Configuration tab. See "Audio/Video
Settings" on page 67.
Video Adjustments. Here is where you can adjust the video picture coming from your
Slingbox. Adjusting these Slingbox settings does not change your television or external device's
audio/video settings. However, every user who watches this Slingbox views it with the adjusted
settings.
• Brightness: darken or brighten the video.
• Contrast: adjust the difference between the light and dark areas of the video picture.
• Saturation: increase or decrease the intensity of the video color.
• Hue: adjust the balance between the red and green picture levels.
Note
Your computer's video driver can also affect the video appearance. Refer to your
computer's help for information about adjusting its video settings.
Audio Adjustment. Volume: adjust the volume of SlingPlayer. The Volume is set to an ideal level by default. If you need to adjust the volume on this
screen, it is recommended that you change your computer and speaker volume levels.
30
Installing SlingPlayer
Slingbox User Guide