Sling Media Slingbox User Manual page 39

Control Code
You need to set the control code for the IR feature to work. The type of device and the brand
must be correct for the remote to work.
This screen will be displayed only if you selected a Composite or an S-Video cable during
setup.
Ensure your IR control cable is attached and the emitter is placed near the IR input of the
device.
1. Select a code from the list and click Power.
• If your DVD player switches off, the code you selected is correct.
• If it did not switch off, try the next code.
• If none of them work, visit http://www.slingmedia.com/support and use the keywords
"IR Control Code" to search for the complete list of devices and their Alternative Code.
Enter the relevant Alternative code in the box.
2. Click Next.
Continue to name and assign user and administrator passwords for your Slingbox. See
"Name and Password Setup" on page 36.
Slingbox User Guide
SlingPlayer Application Setup
35