Hd camera extension cable, hospitalgrade,
multiple use, sterilizable extension cable that allows placement flexibility in the surgical facility (188 pages)
Page 1
IMPORTANT File in your maintenance records Renaissancet Series Stretchers Model 1210 Emergency Care Model 1710 PACU MAINTENANCE MANUAL For Parts or Technical Assistance 1−800−327−0770 (Option 2)
Knee Gatch Angle 0 to 30_ Trendelenburg \ Reverse Trendelenburg +18_ to −18_ Stryker reserves the right to change specifications without notice. WARNING / CAUTION / NOTE DEFINITION The words WARNING, CAUTION and NOTE carry special meanings and should be carefully reviewed.
Preventative maintenance should be performed at a minimum of annually. A preventative maintenance pro- gram should be established for all Stryker Medical equipment. Preventative maintenance may need to be performed more frequently based on the usage level of the product.
If these types of products are used to clean Stryker patient handling equipment, measures must be taken to insure the stretchers are rinsed with clean water and thoroughly dried following cleaning. Failure to properly rinse and dry the stretchers will leave a cor- rosive residue on the surface of the stretcher, possibly causing premature corrosion of critical components.
Service Information CASTER COVER INSTALLATION AND REMOVAL Double Prongs Looking through the larger of the two side cut−outs, align the cover with the axle nut or bolt head, as shown. Single Prong Push down on the opposite side of the cover until the single prong engages the caster horn.
Service Information RELEASE PEDAL ADJUSTMENT 1. Manually disengage the release pedal swivel (item J on page 33) from the release pedal assembly. 2. To increase the release rod engagement with the release valve, turn the release pedal swivel clockwise on the threaded release rod. 3.
Service Information SIDE CONTROL BRAKE ROD REMOVAL Required Tools: Hammer 7/32” Punch Needle Nose Pliers String or Bungee Cords Fifth Wheel Base 1. Pump the litter up to full height. 2. Lift the base hood and support it from the litter using string or bungee cords. 3.
Service Information FOOT END RELEASE PEDAL REPLACEMENT Required Tools: Needle Nose Pliers 1. Apply the stretcher brakes. 2. Disconnect the release pedal return springs from the foot end release pedals. 3. Remove the rue ring cotters and the clevis pins connecting the foot end release pedals to the mounting bracket.
Service Information BRAKE RING REMOVAL Required Tools: 9/16” Socket w/Extension 3/8” Drive Ratchet Needle−Nose Pliers String or Bungee Cord 1. Pump the litter up to full height. 2. Lift the base hood and support it from the litter using string or bungee cords. 3.
Service Information BIG WHEEL HUBCAP REMOVAL Required Tools: Large Standard Screwdriver 1. Using a large standard screwdriver, pry evenly around the entire edge of the Big Wheel hubcap until it pops off the mounting studs on the wheel. CAUTION Do not attempt to pull off the hubcap after prying up only one side. Damage to the slots on the hubcap or the mounting studs on the wheel could result.
Service Information LITTER TOP REMOVAL Required Tools: 1/2” Socket w/Extension 3/8” Drive Ratchet Standard Screwdriver 1. Using the foot pedal, pump up the litter top to full height. 2. Remove the stretcher mattress 3. Remove the round, black hole plugs from the jack supports at each end of the litter to expose the jack support tube truss head screws.
Service Information BIG WHEEL CAM GAS SPRING DAMPENER REMOVAL Required Tools: 1/2” Socket 3/8” Drive Ratchet Needle−Nose Pliers 1. Remove the litter top from the stretcher (see page 12). 2. Lift the base hood off the base frame. 3. Remove the two clevis pins and rue ring cotters connecting the brake rods to the drive arm at the center of the base near the cam bracket assembly.
Service Information JACK DESCENT RATE ADJUSTMENT Required Tools: Screwdriver Bungee Cords (or equivalent) Adjustment Procedure: 1. Pump the litter up to full height. 2. Lift the base hood, separating the hood from the base frame. Support the hood from the litter using bun- gee cords so it is out of the way.
Service Information FOOT END HYDRAULIC JACK REMOVAL (BASE WITH DUAL CONTROLS) Required Tools: 1/2” Socket 3/8” Drive Ratchet Pliers 1. Remove the litter top from the stretcher (see page 12). 2. Lift the base hood off the base frame. 3. Remove the two hex washer head screws and washers connecting the pump pedal link to the foot end pump pedal assembly and pump connecting rod.
Service Information FOOT END HYDRAULIC JACK REMOVAL (BIG WHEEL BASE WITH 3−SIDED CONTROLS) Required Tools: 1/2” Socket 3/8” Drive Ratchet Pliers 1. Remove the litter top from the stretcher (see page 12). 2. Lift the base hood off the base frame. 3.
Service Information TRANSFER BOARD COUNTERBALANCE ADJUSTMENT Required Tools: 7/16 Open End Wrench 1. Raise the transfer board to the full up position. 2. Unhook the extension spring at the eye bolt. 3. Using a 7/16 open end wrench, loosen the jam nut at the eye bolt. 4.
Quick Reference Replacement Parts List PART NAME PART NUMBER Cam Replacement Kit, Big Wheel ......... . . 1040−700−003 Hydraulic Jack, Constant Descent .
Brake Rod Assembly Assembly part number 0753−003−001 (reference only) Item Part No. Part Name Qty. 0026−067−000 Slotted Spring Pin 0753−003−004 Brake Rod Support (page Drive Link Assembly 0753−003−014 Brake Rod 0753−003−015 Nyliner 0753−003−099 Butterfly “V” Pedal (page Drive Link Assembly 1210−201−335 Red Brake Label 1210−201−336...
Page 26
0753−003−010 Drive Link Assembly Item Part No. Part Name Qty. 0753−003−011 Brake Rod Drive Link 0753−003−061 Brake Cam Drive Link 0753−003−098 Flat Hd. Semi−Tubular Rivet 0753−003−102 Brake Cam...
Page 27
0753−006−135 Drive Link Assembly Item Part No. Part Name Qty. 0753−003−011 Brake Rod Drive Link 0753−003−098 Semi−Tubular Rivet 0753−006−122 5th Wheel Cam Drive Link 0753−006−147 Fifth Wheel Drive Link...
Base Assembly with 4−Sided Brakes Assembly part number 0753−003−120 (reference only)
Page 30
Base Assembly with 4−Sided Brakes HEAD END FOOT END Item Part No. Part Name Qty. Item Part No. Part Name Qty. 0005−044−000 Step Bolt 0753−003−066 Clevis Pin 0011−262−000 Washer 0753−003−079 Brake Pin Guide 0016−035−000 Nylock Hex Nut (page Side Brake Rod Ass’y 0016−049−000 Nylock Hex Nut 0753−003−121...
0753−003−210 Side Control Brake Rod Assembly Item Part No. Part Name Qty. 0026−067−000 Slotted Spring Pin 0026−340−000 Clevis Pin 0027−020−000 Rue Ring Cotter 0753−003−099 Butterfly “V” Pedal 0753−003−112 Side Control Link 0753−003−117 Rod End Link 0753−003−119 Side Control Brake Rod 0753−003−214 Shaft Support 1210−201−335...
Brake Rod Assembly Assembly part number 0753−003−125 (reference only) Item Part No. Part Name Qty. 0026−067−000 Slotted Spring Pin 0753−003−004 Brake Rod Support (page Drive Link Assembly 0753−003−014 Brake Rod 0753−003−015 Brake Rod Nyliner 0753−003−099 Butterfly “V” Pedal 0753−003−112 Side Control Link (page Drive Link Assembly 1210−201−335...
Page 33
Base with Dual Side Hydraulics (Fifth Wheel Base) Assembly part number 0753−005−200 (reference only) HEAD END Insert pump ram into keyhole slot on both ends. Lower pump connecting rod weldment onto pump ram as shown Insert spring hook thru slots in pump pedal Attach other end onto jack tower as shown...
Page 34
Base with Dual Side Hydraulics (Fifth Wheel Base) Insert spring hook thru hole in pump connecting rod. Attach other hook to return spring as shown Insert spring hook onto hook on release pedal. Insert other hook onto pump connecting rod as shown.
Page 35
Base with Dual Side Hydraulics (Fifth Wheel Base) See Detail A Insert head end release rod into release valve assembly as shown DETAIL B Insert foot end release rod into release valve assembly as shown DETAIL A See Detail B Item Part No.
0753−005−185 Head End Pump Pedal Assembly Item Part No. Part Name Qty. 0026−343−000 Groove Pin 0715−001−140 Vinyl Tube 0753−005−044 Pump Pedal Bushing 0753−005−180 Head End Pump Pedal Weldment 0753−201−126 Pump Pedal...
Base with 3−Side Hydraulics (Fifth Wheel Base) Asssembly part number 0753−005−210 (reference only) FOOT END Insert spring hook thru slots in pump pedal Attach other end onto jack tower as shown...
Page 40
Base with 3−Side Hydraulics (Fifth Wheel Base) Item Part No. Part Name Qty. 0011−023−000 Washer 0014−071−000 Washer 0023−288−000 Hex Washer Hd. Screw 0027−031−000 Cotter Pin 0038−497−000 Extension Spring (page Foot End Release Pedal Ass’y 0753−005−044 Pump Pedal Bushing 0753−005−063 Foot End Mtg. Bracket 0753−005−074 Pivot Pin 0753−005−075...
Foot End Release Pedal Assembly Assembly part number 0753−004−223 (reference only) Item Part No. Part Name Qty. 0026−132−000 Clevis Pin 0027−020−000 Rue Ring Cotter 0027−022−000 Rue Ring Cotter 0052−822−000 Snap−In Nyliner 0753−004−028 Release Pedal Return Spring 0753−004−038 Foot Release Rod 0753−004−039 Head Release Rod 0753−004−124...
Page 44
Big Wheel End Control Base Assembly Assembly part number 1040−015−105 (reference only) HEAD END...
Page 45
Big Wheel End Control Base Assembly DETAIL A HEAD END See Detail A...
Page 46
Big Wheel End Control Base Assembly Item Part No. Part Name Qty. 0021−166−000 Set Screw 0023−150−000 Hex Washer Hd. Screw 0023−288−000 Hex Washer Hd. Screw 0026−273−000 Clevis Pin 0025−330−000 Clevis Pin 0027−020−000 Rue Ring Cotter 0029−007−000 Dual Lock 0029−009−000 Dual Lock 0042−020−000 Collar 0081−330−000...
1040−003−185 Drive Link Assembly Item Part No. Part Name Qty. 0753−003−098 Semi−Tubular Rivet 0753−003−102 Brake Cam 1040−003−174 Brake Rod Drive Link 1040−003−076 Cam Drive Link...
1040−003−191 Brake Rod Assembly (Big Wheel Base) Item Part No. Part Name Qty. 0026−067−000 Slotted Spring Pin 1040−003−113 Brake Rod 0753−003−099 Butterfly “V” Pedal...
Page 51
Base with Dual Side Hydraulics (Big Wheel Base) Assembly part number 1040−005−400 (reference only) Insert pump ram into keyhole slot on both ends. Lower pump connecting rod weldment onto pump ram as shown. Insert item P to retain pump connecting rod. 0753−002−025 Constant Descent Jacks 0753−002−080 Variable Descent Jacks...
Page 52
Base with Dual Side Hydraulics (Big Wheel Base) Insert spring hook thru hole in pump connecting rod weldment Attach other hook to return spring hook as shown. Insert spring hook into hook on release pedal assembly. Insert other hook into pump connecting rod weldment as shown.
Page 53
Base with Dual Side Hydraulics (Big Wheel Base) Insert head end release rod into release valve assembly as shown DETAIL A SEE DETAIL B Insert foot end release rod into release valve assembly as shown DETAIL B SEE DETAIL A Item Part No.
Base with 3−Side Hydraulics (Big Wheel Base) Asssembly part number 0753−005−310 (reference only) FOOT END Insert spring hook thru slots in pump pedal Attach other end onto jack tower as shown...
Page 56
Base with 3−Side Hydraulics (Big Wheel Base) Item Part No. Part Name Qty. 0011−023−000 Washer 0014−071−000 Washer 0023−288−000 Hex Washer Hd. Screw 0027−031−000 Cotter Pin 0038−497−000 Extension Spring (page Foot End Release Pedal Ass’y 0753−005−044 Pump Pedal Bushing 0753−005−063 Foot End Mtg. Bracket 0753−005−074 Pivot Pin 0753−005−075...
Big Wheel Carriage Assembly Assembly part number 1040−015−101 (reference only) Item Part No. Part Name Qty. 0014−004−000 Washer 0026−341−000 Clevis Pin 0027−020−000 Rue Ring Cotter 0028−330−000 Spiral Retaining Ring 0081−011−000 Needle Bearing 1040−015−006 Carriage Return Spring 1040−015−030 Cover w/Counterweight 1040−015−038 Washer 1040−015−053 Carriage Spring Retainer...
Page 60
Big Wheel 4−Sided Control Base Assembly part number 1040−025−105 (reference only) HEAD END...
Page 61
Big Wheel 4−Sided Control Base DETAIL A HEAD END See Detail A...
Page 62
Big Wheel 4−Sided Control Base Item Part No. Part Name Qty. 0021−166−000 Set Screw 0023−150−000 Hex Washer Hd. Screw 0023−288−000 Hex Washer Hd. Screw 0026−273−000 Clevis Pin 0026−330−000 Clevis Pin 0027−020−000 Rue Ring Cotter 0029−007−000 Dual Lock 0029−009−000 Dual Lock 0042−020−000 Collar 0081−330−000...
Side Control Big Wheel Carriage Assembly Assembly part number 1040−025−101 (reference only)
Page 64
Side Control Big Wheel Carriage Assembly Item Part No. Part Name Qty. 0011−148−000 Washer 0011−525−000 Washer 0014−004−000 Washer 0026−341−000 Clevis Pin 0026−342−000 Groove Pin 0027−020−000 Rue Ring Cotter 0028−166−000 External Retaining Ring 0028−330−000 External Retaining Ring 0081−011−000 Needle Bearing 0081−175−000 Thrust Bearing 0753−003−099 Butterfly “V”...
1040−025−010 Side Control Big Wheel Linkage Ass’y Item Part No. Part Name Qty. 0753−003−098 Flat Hd. Semi−Tubular Rivet 0753−003−117 Rod End Link 1040−025−011 Main Link 1040−025−013 Toggle Pivot Plate 1040−025−016 Main Link Cover 1040−025−020 Yoke Weldment 1040−025−018 Toggle Pivot Spacer 1040−025−027 Link Spacer...
0753−002−080 Variable Descent Hydraulic Jack Option 0753−001−001 Base Frame Weldment Item Part No. Part Name Qty. 0023−288−000 Hex Washer Hd. Screw 0753−002−070 Variable Descent Jack Assembly 0753−010−007 Reservoir Clamp...
Page 67
0753−002−025 Constant Descent Hydraulic Jack Option 0753−001−001 Base Frame Weldment Item Part No. Part Name Qty. 0023−288−000 Hex Washer Hd. Screw 0753−002−001 Constant Descent Jack Ass’y 0753−010−007 Reservoir Clamp...
Assembly part number 0753−010−060 (reference only) Department Label see page 70 Specification Label FOOT END HEAD END Item Part No. Part Name Qty. 0753−010−035 Base Hood 1040−010−134 Bellows 0753−010−052 Foot End Pump Pedal Label 0753−010−053 Foot End Release Pedal Label 0946−201−060 Stryker Logo Label...
Page 69
Specification Label FOOT END HEAD END Item Part No. Part Name Qty. 0753−010−037 Base Hood 1040−010−134 Bellows 0753−010−052 Foot End Pump Pedal Label 0753−010−053 Foot End Release Pedal Label 0946−201−060 Stryker Logo Label 0753−010−019 Brake/Steer Label, Left 0753−010−018 Brake/Steer Label, Left...
Page 70
Assembly part number 1040−015−300 (reference only) Department Label see page 70 Specification Label FOOT END HEAD END Item Part No. Part Name Qty. 1040−010−134 Bellows 1040−015−004 Base Hood 0753−010−052 Foot End Pump Pedal Label 0753−010−053 Foot End Release Pedal Label 0946−201−060 Stryker Logo Label...
Page 71
Base Labeling Assembly Color Item F Brake/ Item G Item H Brake/ Item J Litter Set P/N Steer, Foot End Lift/Lower, Left Steer, Head End Lift/Lower, Right Bumper Strip 0753−010−016 0753−010−055 0753−010−017 0753−010−054 1010−700−015 0753−010−100 PURPLE 0753−010−160 0753−010−155 0753−010−170 0753−010−154 1010−700−025 0753−010−101 GREEN...
Page 72
1210 Litter Assembly Assembly part number 1210−130−010 (reference only) 1010−201−020 Frame Assembly FOOT END...
Page 73
1210 Litter Assembly HEAD END LEFT SIDE RIGHT SIDE...
Page 74
1210 Litter Assembly Item Part No. Part Name Qty. 0003−355−000 Hex Hd. Cap Screw 0003−356−000 Hex Hd. Cap Screw 0003−359−000 Hex Hd. Cap Screw 0004−330−000 Soc. Hd. Cap Screw 0011−360−000 Washer 0014−021−000 Washer 0016−117−000 Hex Lock Nut 0016−118−000 Hex Lock Nut 0023−283−000 Ph.
Page 75
1710 Litter Assembly Assembly part number 1710−130−010 (reference only) 1510−201−020 Frame Assembly FOOT END...
Page 76
1710 Litter Assembly HEAD END HEAD RIGHT SIDE LEFT SIDE...
Page 77
1710 Litter Assembly Item Part No. Part Name Qty. 0003−355−000 Hex Hd. Cap Screw 0003−356−000 Hex Hd. Cap Screw 0003−359−000 Hex Hd. Cap Screw 0004−330−000 Soc. Hd. Cap Screw 0011−360−000 Washer 0014−021−000 Washer 0016−117−000 Hex Lock Nut 0016−118−000 Hex Lock Nut 0023−283−000 Ph.
Siderail/Litter Assembly, Fold−to−Head Siderails Assembly part number 1009−020−010 (reference only) HEAD END Item Part No. Part Name Qty. 0004−135−000 But. Hd, Cap Screw 0004−136−000 But. Hd. Cap Screw 0011−077−000 Flat Washer 0016−118−000 Nylock Nut 0021−105−000 Set Screw 0037−074−000 Hole Plug 0038−220−000 Compression Spring 0721−026−066...
Page 79
1010−026−017 & 1010−026−019 Siderail, Fold−to−Head (1010−026−019 Left Siderail Shown) Item Part No. Part Name Qty. 1010−026−015 Top Rail 1010−026−083 Upright 1010−026−084 Upright, Bent 1010−026−082 Sleeve Bearing 0025−106−000 Semi−Tubular Rivet 1010−026−010 Round Hole Plug 1010−026−085 Upright, Latch 1010−026−012 Bent Spindle Rest...
Page 80
Siderail/Litter Assembly, Fold−to−Foot Siderails Assembly part number 1009−021−010 (reference only) FOOT END Item Part No. Part Name Qty. 0004−135−000 But. Hd, Cap Screw 0004−136−000 But. Hd. Cap Screw 0011−077−000 Flat Washer 0016−118−000 Nylock Nut 0021−105−000 Set Screw 0037−074−000 Hole Plug 0038−220−000 Compression Spring 0721−026−066...
Page 81
0721−026−096 & 0721−026−097 Siderail, Fold−to−Foot (0721−026−097 Left Siderail Shown) Item Part No. Part Name Qty. 1010−026−015 Top Rail 1010−026−083 Upright 1010−026−084 Upright, Bent 1010−026−082 Spacer 0025−106−000 Semi−Tubular Rivet 1010−026−010 Round Hole Plug 1010−026−085 Upright, Latch 1010−026−012 Bent Spindle Stop...
Pneumatic Fowler Assembly Assembly part number 1210−031−010 (reference only) HEAD END Item Part No. Part Name Qty. 0004−182−000 But. Hd. Cap Screw 0004−104−000 But. Hd. Cap Screw 0011−179−000 Nylon Washer 0014−021−000 Nylon Washer 0016−116−000 Nylock Hex Nut 0016−117−000 Nylock Hex Nut 0023−256−000 Self−Tapping Screw 0025−133−000...
Page 83
Pneumatic Fowler Assembly Assembly part number 1210−031−120 (reference only) Item Part No. Part Name Qty. 0004−161−000 Hex Soc. But. Hd. Cap Screw 0007−020−000 Truss Hd. Mach. Screw 0025−124−000 Pop Rivet 0015−037−000 Jam Nut 0015−050−000 Hex Nut 0016−028−000 Nylock Nut 0021−125−000 Set Screw 0021−126−000 Set Screw...
Page 84
Pneumatic Fowler Assembly Assembly part number 1710−031−010 (reference only) HEAD END Item Part No. Part Name Qty. 0004−182−000 But. Hd. Cap Screw 0004−104−000 But. Hd. Cap Screw 0011−179−000 Nylon Washer 0014−021−000 Nylon Washer 0016−116−000 Nylock Hex Nut 0016−117−000 Nylock Hex Nut 0023−256−000 Self−Tapping Screw 0025−133−000...
Page 85
Pneumatic Fowler Assembly Assembly part number 1710−031−120 (reference only) Item Part No. Part Name Qty. 0004−161−000 But. Hd. Cap Screw 0007−020−000 Truss Hd. Mach. Screw 0025−124−000 Pop Rivet 0015−037−000 Jam Nut 0015−050−000 Hex Nut 0016−028−000 Fiberlock Nut 0021−125−000 Set Screw 0021−126−000 Set Screw 1001−001−036...
Page 86
Pneumatic Fowler Outer Housing Assembly Assembly part number 1210−031−106 (Right) Item Part No. Part Name Qty. 0025−144−000 Semi−Tubular Rivet 1210−031−103 Pivot Tab 1210−031−104 Outer Housing, Right Assembly part number 1210−031−107 (Left) Item Part No. Part Name Qty. 0025−144−000 Semi−Tubular Rivet 1210−031−103 Pivot Tab 1210−031−105...
Crank Fowler Assembly Assembly part number 1210−033−010 (reference only) Item Part No. Part Name Qty. Item Part No. Part Name Qty. 0004−097−000 Hex But. Hd. Cap Screw 0025−133−000 Pop Rivet 0004−104−000 But. Hd. Cap Screw 0946−001−064 Fowler Operation Label 0007−070−000 Truss Hd.
Page 88
Crank Fowler Assembly Assembly part number 1710−033−010 (reference only) Item Part No. Part Name Qty. Item Part No. Part Name Qty. 0004−097−000 Hex But. Hd. Cap Screw 0025−133−000 Pop Rivet 0004−104−000 But. Hd. Cap Screw 0946−001−064 Fowler Operation Label 0007−070−000 Truss Hd.
Page 89
1001−033−025 (1210) Fowler Crankscrew Assembly 1501−033−025 (1710) Fowler Crankscrew Assembly Item Part No. Part Name Qty. 1001−033−026 Drive Bar Assembly 1501−033−026 Drive Bar Assembly 1550−01−016 Crank Assembly 0946−033−018 Crank Disc 0938−001−177 Knob 0016−102−000 Kep Nut 0378−124−029 Shoulder Bolt 0946−033−035 Fowler Screw 0026−014−000 Roll Pin 0081−174−000...
Page 91
Fiberresin Stationary Foot Section Assembly Assembly part number (reference only): 1231−019−001 − 26” Wide Item Part No. Part Name Qty. 0025−171−000 Rivet 0753−010−031 26” Fiberresin Foot Section Skin 7900−001−102 Velcro Pile 24 1/2”...
Page 92
Fiberresin Stationary Foot Section Assembly Assembly part number (reference only): 1731−019−001 − 29” Wide Item Part No. Part Name Qty. 0025−171−000 Rivet 0753−010−032 29” Fiberresin Foot Section Skin 7900−001−102 Velcro Pile 24 1/2”...
Page 93
1210 Knee Gatch Assembly Assembly part number 1010−634−010 (reference only) 1010−201−020 Litter Frame Item Part No. Part Name Qty. Item Part No. Part Name Qty. 0003−358−000 Hex Hd. Cap Screw 1001−034−131 Slider Support 0004−327−000 Soc. Hd. Cap Screw 1010−234−015 Mounting Bracket 0005−034−000 Rd.
Page 94
1710 Knee Gatch Assembly Assembly part number 1510−634−010 (reference only) 1510−201−020 Litter Frame Item Part No. Part Name Qty. Item Part No. Part Name Qty. 0003−358−000 Hex Hd. Cap Screw (page Gatch Crankscrew Ass’y 1 0004−327−000 Soc. Hd. Cap Screw 1001−034−131 Slider Support 0005−034−000...
Transfer System Assembly Assembly part number 1210−132−3 (reference only) HEAD END Item Part No. Part Name Qty. (page Board Support Assembly 1010−224−025 Spring Retainer 0010−011−000 Eye Bolt (page Transfer System Ass’y, Rt. (page Transfer System Ass’y, Lt. 0011−180−000 Washer 0015−021−000 Hex Jam Nut 0016−118−000 Fiberlock Nut...
Page 97
1010−232−010 Short Transfer Board Assembly, Right Item Part No. Part Name Qty. 1010−032−098 Pivot 1010−224−033 Connecting Link Ass’y, Rt. 1010−232−016 Pivot Arm Ass’y, Right 1020−032−100 Transfer Board Ass’y 0011−224−000 Nylon Flat Washer 0014−021−000 Nylon Flat Washer 0016−118−000 Nylock Hex Nut 0028−093−000 Retaining Ring 0003−356−000...
Page 98
1010−232−011 Short Transfer Board Assembly, Left Item Part No. Part Name Qty. 1010−032−098 Pivot 1010−224−033 Connecting Link Ass’y 1010−232−017 Pivot Arm Ass’y, Lt. 1020−032−100 Transfer Board Ass’y 0011−224−000 Nylon Flat Washer 0014−021−000 Nylon Flat Washer 0016−118−000 Nylock Hex Nut 0028−093−000 Retaining Ring 0003−356−000 Hex Hd.
Page 99
1010−024−030 Arm Board Support Assembly Item Part No. Part Name Qty. 1010−024−015 Support Block 1010−024−016 Support Arm 1010−024−014 Warning Label 0038−263−000 Spring 0008−017−000 Shoulder Bolt 1010−026−046 Ball Knob...
1210−153−000 Foot End Corners − No Steer Handles HEAD END Item Part No. Part Name Qty. 0023−104−000 Self−Tapping Screw 1010−201−238 Corner, Slot 1010−201−239 Corner, Hole...
Page 104
0390−025−000 Standard, Removable I.V. Pole Assembly Item Part No. Part Name Qty. 0024−023−000 Plastic Knob 0390−003−053 Double I.V. Ass’y 0393−003−043 Tube Assembly 0004−496−000 Soc. Hd. Cap Screw...
Page 105
1210−117−000 & 1710−117−000 Tethered I.V. Assembly HEAD END Item Part No. Part Name Qty. 0025−133−000 Pop Rivet 0025−171−000 Rivet 0034−022−000 Cable Clamp 1501−127−019 I.V. Plug (page 105) Tethered I.V. Pole Assembly 1211−117−021 Backing Plate 1211−117−022 I.V. Clip...
Page 106
1211−117−010 Tethered I.V. Pole Assembly Item Part No. Part Name Qty. 0052−017−000 Spacer 1211−117−020 Cable Assembly 0926−400−062 Stop Sleeve 1010−059−016 I.V. Hook 1211−117−011 Extension Rod 1211−117−012 Base Tube Weldment 0004−495−000 Low Hd. Soc. Hd. Cap Screw 1211−117−016 Knob 0014−020−000 Nylon Washer 0004−232−000 Button Hd.
Optional 2−Stage I.V. Pole Mounting Assembly Assembly part numbers 1010−280−000 (Foot End) − 1210 1010−281−000 (Head End) − 1210 1510−280−000 (Foot End) − 1710 1510−281−000 (Head End) − 1710 FOOT END HEAD END Item Part No. Part Name Qty. (page 107) I.V.
Page 108
1211−210−010 Optional 2−Stage I.V. Pole Assembly Item Part No. Part Name Qty. 0008−031−000 Soc. Hd. Cap Screw 0052−017−000 Washer 0926−400−162 Spacer 1211−210−029 2nd Stage Assembly 1001−359−013 Dampener 1001−159−028 Base Tube 1010−059−016 I.V. Hook (page 108) I.V. Pole Latch 1001−359−112 Pivot...
Page 109
1211−210−026 I.V. Pole Latch Assembly Item Part No. Part Name Qty. 0028−167−000 Retaining Ring 0031−004−000 Steel Ball 0038−392−000 Crest−to−Crest Spring 1211−091−034 Release Label 1211−110−018 I.V. Latch Seal 1211−110−020 Washer 1211−110−021 I.V. Latch Locking Pin 1211−110−022 I.V. Latch Guide 1211−110−024 I.V. Latch O.D. Housing 1211−110−035 Washer 1211−110−036...
Page 110
Optional 3−Stage I.V. Pole Mounting Assembly Assembly part numbers 1010−061−000 (Head End) − 1210 1010−062−000 (Foot End) − 1210 1510−061−000 (Head End) − 1710 1510−062−000 (Foot End) − 1710 FOOT END HEAD END Item Part No. Part Name Qty. (page 110) I.V.
Page 111
1211−211−010 Optional 3−Stage I.V. Pole Assembly Item Part No. Part Name Qty. 0007−004−000 Truss Hd. Machine Screw 0026−076−000 Roll Pin 0052−017−000 Spacer 1211−210−031 2nd Stage Assembly 0926−400−162 Spacer (page 111) 3rd Stage Assembly 1001−161−023 Base Tube 1010−059−016 I.V. Hook 1010−061−014 Collar (page 108)
Page 112
3−Stage I.V. Pole 3rd Stage Assembly Assembly part number 1211−110−032 (reference only) NOTE Item F, part number 1010−061−018 is left hand thread. When removing it, turn clockwise to loosen it. Item Part No. Part Name Qty. 0031−021−000 Ball 0038−303−000 Compression Spring 1010−061−013 Ball Retainer 1010−061−016...
0926−039−000 Optional Defibrillator Tray Assembly Assembly part number 0926−039−010 (reference only) Umbrella Nut/Crosstube Detail Strap Securing Detail Item Part No. Part Name Qty. Item Part No. Part Name Qty. 0946−039−004 Tray 0946−039−003 Support Tube 0926−039−016 Crosstube 0926−001−082 Label 0025−055−000 Rivet 1010−050−021 Long Strap 0926−039−009...
0926−040−100 Foot Board/Chartholder Assembly Assembly part number 0926−040−010 (reference only) Item Part No. Part Name Qty. 0946−028−011 Chart Holder 0946−029−006 Foot Board 1020−030−000 Upright Oxygen Bottle Holder Ass’y Item Part No. Part Name Qty. 1020−030−011 Upright Bottle Holder 0027−012−000 Cotter Pin 1020−030−017 Specification Label...
Page 118
1001−070−000 C−Spine Cassette Holder Assembly Item Part No. Part Name Qty. 1010−070−025 I.V. Adaptor 1010−070−018 Specification Label 0011−447−000 Flat Washer 0004−054−000 But. Hd. Cap Screw (page 118) Support Pole Assembly (page 119) Storage Bracket Ass’y 0016−118−000 Nylock Nut 0003−356−000 Hex Hd. Cap Screw 1001−070−011 Attachment Bracket 0003−355−000...
Page 119
1010−070−010 C−Spine Support Pole Assembly View A−A Item Part No. Part Name Qty. 1010−070−033 Support Tube Cap 0026−006−000 Roll Pin 1010−070−034 Support Arm Weldment 1010−070−042 Cassette Holder Weldment 1010−070−050 Adjustment Tube Weldment 1010−070−030 Base Tube Weldment 1010−070−045 Knob 0025−055−000 Pop Rivet 1010−070−044 Pivot Pin 0026−005−000...
Page 120
1010−070−019 C−Spine Storage Bracket Assembly 6.5” (Ref.) 2” (Ref.) Item Part No. Part Name Qty. 1010−070−020 Storage Bracket Weldment 1010−070−045 Knob 1010−070−023 Storage Label...
Page 121
1001−055−000 Heel Stirrup and Support Assembly Assembly part number 1001−055−010 (reference only) FOOT END Item Part No. Part Name Qty. 0003−359−000* Hex Hd. Cap Screw 0011−159−000 Flat Washer 0016−118−000 Nylock Hex Nut (page 121) Stirrup Support Ass’y, Rt. (page 122) Stirrup Support Ass’y, Lt.
Page 122
1001−055−015 Right Stirrup Support Assembly Item Part No. Part Name Qty. 0650−002−032 Lock Screw Assembly 0966−051−019 Wedge Lock, Modified 1001−055−011 Mounting Bracket 1010−055−016 Right Support Tube Wldmt. 0004−494−000 Soc. Hd. Cap Screw 0011−410−000 Washer 1211−117−016 Knob 0026−007−000 Roll Pin 0038−171−000 Compression Spring...
Page 123
1001−055−016 Left Stirrup Support Assembly Item Part No. Part Name Qty. 0650−002−032 Lock Screw Assembly 0966−051−019 Wedge Lock, Modified 1001−055−011 Mounting Bracket 1010−055−026 Left Support Tube Ass’y 0004−494−000 Soc. Hd. Cap Screw 0011−410−000 Washer 1211−117−016 Knob 0026−007−000 Roll Pin 0038−171−000 Compression Spring...
Page 124
1010−055−029 Heel Stirrup Assembly Item Part No. Part Name Qty. 0390−020−013 Stirrup 0390−020−009 Stirrup Holder Assembly 1010−055−030 Extension Tube Assembly 0024−011−000 Knob 0026−043−000 Roll Pin 0022−008−000 Drive Screw...
If requested by Stryker, products or parts for which a warranty claim is made shall be returned prepaid to Stryker’s factory. Any improper use or any alteration or repair by others in such manner as in Stryker’s judgement affects the product materially and adversely shall...
Stryker will perform all service during regular business hours (9−5) * Replacement parts and labor for products under PM contract will be discounted. ** Does not include any disposable items, I.V. poles (except for Stryker HD permanent poles), mattresses, or damage re- sulting from abuse.
Page 131
European Representative Stryker EMEA RA/QA Director Stryker France ZAC Satolas Green Pusignan Av. De Satolas Green 69881 MEYZIEU Cedex France 6300 S. Sprinkle Road, Kalamazoo, MI 49001−9799 (800) 327−0770 www.strykermedical.com DH 6/04 1210−209−002 REV A...