Stryker 1550 Maintenance Manual
  1. Manuals
  2. Brands
  3. Stryker Manuals
  4. Medical Equipment
  5. 1550
  6. Maintenance manual

Stryker 1550 Maintenance Manual

Electric stretcher
Hide thumbs Also See for 1550:
Table of Contents

Advertisement

Quick Links

Download this manual
Ma i n t e n a n c e
Me d i c a l
Ma n u a l
E l e c t r i cS t r e t c h e r
Mo d e l 1 5 5 0
I mp o r t a n t
I n f o r ma t i o n
F i l e i n y o u r
F o r p a r t so r t e c h n i c a l
m a i n t e n a n c e
a s s i s t a n c ec a l l
r e c o r d s
8 0 03 2 70 7 7 0( o p t i o n2 )

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1550 and is the answer not in the manual?

Questions and answers

Related Manuals for Stryker 1550

Summary of Contents for Stryker 1550

  • Page 1 Ma i n t e n a n c e Me d i c a l Ma n u a l E l e c t r i cS t r e t c h e r Mo d e l 1 5 5 0 I mp o r t a n t I n f o r ma t i o n F i l e i n y o u r...

  • Page 3: Table Of Contents

    Table of Contents Introduction Specifications ................Stretcher Symbols .
  • Page 4 Table of Contents Assembly Drawings and Parts Lists Non− Electric Lift Base Assembly ............32−39 Caster Assembly .

  • Page 5: Introduction

    Introduction INTRODUCTION This manual is designed to assist you with the maintenance of the 1550 Electric Stretcher. Read it thoroughly before beginning any maintenance on the equipment. SPECIFICATIONS Safe Working Load 500 pounds (227 kilograms) Overall Bed Length/Width 83.5”/34” Minimum/Maximum Bed Height 22”/35”...

  • Page 6: Stretcher Symbols

    Stretcher Symbols Warning, Refer to Operations or Service/Maintenance Manual Safe Working Load Symbol Medical Equipment Classified by Underwriters Laboratories Inc. with Respect to UL60601−1 Electric Shock, Fire, Mechanical and Other Specified Hazards Only in Accor- CAN/CSA C22.2 NO.601.1 dance with UL 60601−1 First Edition (2003) and CAN/CSA C22.2 No. 601.1 Return to Table of Contents...

  • Page 7: Cleaning

    SOME CLEANING PRODUCTS ARE CORROSIVE IN NATURE AND MAY CAUSE DAMAGE TO THE PRODUCT IF USED IMPROPERLY. If the products described above are used to clean Stryker patient care equipment, measures must be taken to insure the beds are wiped with clean water and thoroughly dried fol- lowing cleaning.

  • Page 8: Checklist

    Preventative maintenance should be performed at a minimum of annually. A preventative maintenance pro- gram should be established for all Stryker Medical equipment. Preventative maintenance may need to be performed more frequently based on the usage level of the product.
  • Page 9 Check fuses F2 (Gatch) and F3 (Fowler) on logic control board. Check patient control switch cable and replace, if necessary. Replace Gatch and/or Fowler motors). Contact Stryker technical support at 1−800−327−0770 for further assistance. Return to Table of Contents...

  • Page 10: Control Board Diagram

    F1 − Fuse 1/10 Amp, 250 VAC, SLO−BLO − Stryker Part Number 2020−16−904 F2 & F3 − Fuse 2 Amp, 250 VAC, SLO−BLO − Stryker Part Number 59−148 F4 − Fuse 7 Amp, 250 VAC, SLO−BLO − Stryker Part Number 59−150...

  • Page 11: Replacement Parts

    ............1550−80−940 Head Board with Push Bar .
  • Page 12 Siderail Component Housing Retrofit Kit, Right Side ..... . 1550−700−16 Siderail Component Housing Retrofit Kit, Left Side ..... . .

  • Page 13: Service Information

    2 and 3 of the following procedure. Do not place unprotected circuit boards on the floor. All circuit boards to be returned to Stryker Medical should be shipped in the static shielding bags the new boards were shipped in.

  • Page 14: Caster Cover Installation And Removal

    Service Information CASTER COVER INSTALLATION AND REMOVAL Double Prongs Looking through the larger of the two side cut−outs, align the cover with the axle nut or bolt head, as shown. Push down on the opposite side of the cover until the Single Prong single prong engages the caster horn.

  • Page 15: Brake Cam Replacement

    Service Information BRAKE CAM REPLACEMENT Brake Cam Part Number 715−201−213 Required Tools: 1/8” Allen Wrench String or Bungee Cord 3/32” Allen Wrench Procedure: 1. Lift and support the base hood using string or bungee cord. 2. Using a 3/32” Allen wrench, loosen the set screw holding the brake adjuster to the brake ring and turn the adjuster clockwise to remove it.

  • Page 16: Fifth Wheel Replacement

    Service Information FIFTH WHEEL REPLACEMENT Required Tools: Pliers String or Bungee Cord 3/16” Allen Wrench (2) 9/16” Box End Wrenches Procedure: 1. Apply the stretcher brakes. 2. Pump the litter up to full height. 3. Lift and support the base hood using string or bungee cord. 4.

  • Page 17: Brake/Steer Gear Replacement

    Service Information BASE SIDE CONTROL BRAKE/STEER GEAR REPLACEMENT Required Tools: Pliers String or Bungee Cord Floor Jack or Equivalent 1/8” Allen Wrench 5/32” Allen Wrench 3/8” Box End Wrench (2) 9/16” Box End Wrenches 3/16” Punch 1/4” Punch Hammer Procedure: 1.

  • Page 18: Jack Replacement, Non Electric Lift Base

    Service Information JACK REPLACEMENT − NON ELECTRIC LIFT BASE (WITHOUT COMPRESSION SPRING) Required Tools: 3/8” Wrench 1/2” Socket 1/2” Wrench Needle Nose Pliers Replacement Procedure: 1. Apply stretcher brakes. Raise litter to full up. Raise Fowler to full up and raise siderails. 2.

  • Page 19: Hydraulic Check Valve Replacement − Non Electric Lift Base

    Service Information HYDRAULIC CHECK VALVE REPLACEMENT − NON−ELECTRIC LIFT BASE Required Tools: 3/8 Open End Wrench Stiff Wire (with bent, pointed end) Small Needle Nose Pliers 3/4 Open End Wrench Torque Wrench (with Ft. Lbs. adjust.) 7/32 Hex Allen Wrench 1/2 Inch Diameter Rod Replacement of Valve #1 WARNING...
  • Page 20 Service Information HYDRAULIC CHECK VALVE REPLACEMENT − NON−ELECTRIC LIFT BASE (CONTINUED) Replacement of Valve (Poppet) #2 WARNING To avoid personal injury or damage to the stretcher, remove the litter and the base hood before beginning service on the jacks. Lower the jack rod completely to relieve the pressure on the pump piston side of the jack.

  • Page 21: Jack/Motor Replacement, Electric Lift Base

    The hydraulic fluid should be visible at the bottom of the fill hole. If it is not, fill the jack with hydraulic fluid (Stryker part number 1550−570−10) until the fluid is visible at the bottom of the fill hole. 16. Reinstall fill plug, plug stretcher power cord into a properly grounded wall receptacle and run the jack up and down electrically.

  • Page 22: Jack Assembly Torque Specification

    6. The hydraulic fluid should be visible at the bottom of the fill hole. If it is not, add Mobil Aero HFA hydraulic fluid (Stryker part number 2020−70−475) until the fluid is visible at the bottom of the fill hole. Replace the fill plug.

  • Page 23: Jack Descent Rate Adjustment

    Service Information JACK DESCENT RATE ADJUSTMENT Required Tools: Screwdriver Bungee Cords Adjustment Procedure: 1. Pump the litter up to full height. 2. Lift the base hood, separating the hood from the base frame. Using the bungee cords, support the base hood.

  • Page 24: Hydraulic Pressure Hose Replacement

    6. Replace the hydraulic oil lost when the hose was removed. Remove the filler plug and add approximately 1 ounce of Mobil AW−32 hydraulic oil (Stryker part number 1550−570−10). Do not fill to the bottom of the fill hole because most of the oil is in the actuator cylinder when the litter is raised.

  • Page 25: Base Lubrication Points

    Service Information BASE LUBRICATION POINTS 1. Lubricate brake adjuster rod around area shown with MPG−2 grease or equivalent. Do not grease area shown. Return to Table of Contents...

  • Page 26: Brake Adjustment

    Service Information BRAKE ADJUSTMENT Required Tools: 3/32” Hex Allen Wrench Pry Bar Thread ”Locktite” Flat on thread of stud must always be aligned with the set screw. Turn must always be full circle only. Return to Table of Contents...

  • Page 27: Fowler Lift Motor/Actuator Replacement

    Service Information FOWLER LIFT MOTOR/ACTUATOR REPLACEMENT Required Tools: (2) 7/16” Open End Wrenches 5/32” Allen Wrench Standard Screwdriver (12” or longer) Two 1/2” Wrenches or Sockets 1/4” Nut Driver 5/16” Ratchet and Extension 5/64” Allen Wrench String or Cord Sawhorse (or equivalent) FOOT END Procedure: 1.
  • Page 28 Service Information FOWLER LIFT MOTOR/ACTUATOR REPLACEMENT (CONTINUED) 8. Using a 5/16” ratchet and extension, remove the two screws from the bottom mounting bracket under the actuator assembly. Support the foot end of the stretcher using a sawhorse or the equivalent. Using a 1/2” wrench or socket and ratchet, remove the bolt holding the litter support tube on top of the jack to the litter roller assembly and swing the litter support aside.

  • Page 29: Gatch Lift Motor/Actuator Replacement

    Service Information GATCH LIFT MOTOR/ACTUATOR REPLACEMENT Required Tools: 7/16” Socket Ratchet 1/4” Socket or Wrench Inclinometer 5/16” Socket 5/64” Allen Wrench 3” Extension Medium Standard Screwdriver 1/2” Wrench or Socket 1/2” Socket 5/32” Wrench (2) 7/16” Wrenches String or Cord Sawhorse (or equivalent) Procedure: 1.

  • Page 30: Fowler And Knee Gatch Motor/Actuator Adjustment

    Service Information FOWLER AND KNEE GATCH MOTOR/ACTUATOR ADJUSTMENT Procedure: 1. Electrically raise the Fowler (or Knee Gatch) until it stops. Use an inclinometer to check the angle of the Fowler/Knee Gatch. If the angle is not 70_− 80_ for the Fowler or 28_− 30_ for the Gatch, the actuator(s) will need to be adjusted.

  • Page 31: Logic Circuit Board Replacement

    Service Information LOGIC CIRCUIT BOARD REPLACEMENT Logic Circuit Board Part Number 1550−80−940 Required Tools: Standard Screwdriver 5/32” Allen Wrench 7/64” Allen Wrench Procedure: 1. Unplug the power cord from the wall socket. Properly ground yourself (see page 11). 2. Lift the foot section and pivot it back, securing it with a string or cord. Using a 5/32” Allen wrench, remove the four screws and two Knee Gatch guides from the sides of the motor/board enclosure cover.

  • Page 32: Patient Control Lockout Switch Replacement

    Service Information PATIENT CONTROL LOCKOUT SWITCH REPLACEMENT Lockout Rocker Switch Part Number 59−68 Required Tools: Standard Screwdriver 5/32” Allen Wrench Procedure: 1. Unplug the power cord from the wall socket. Properly ground yourself (see page 11). 2. Lift the foot section and pivot it back, securing it with a string or cord. Using a 5/32” Allen wrench, remove the four screws and two Knee Gatch guides from the sides of the motor/board enclosure cover.

  • Page 33: Siderail Patient Control Replacement

    Service Information SIDERAIL PATIENT CONTROL REPLACEMENT Required Tools: 5/64” Allen Wrench Procedure: 1. Unplug the power cord from the wall socket. Properly ground yourself (see page 11). Lower the siderail. 2. Peel the label off the siderail top rail. 3. Using a 5/64” Allen wrench, remove the two screws from the top rail. 4.
  • Page 34 Non−Electric Lift Base Assembly Assembly part number 1550−401 (reference only) Return to Table of Contents...
  • Page 35 55−18−0 Threaded Insert 59−75−0 Cable Tie 59−116−0 PVC Switch Box 59−118−0 Switch Box Cover 1210−30−210 3−Sided Control Base Assembly1 1231−70−10 Jack Assembly 1550−185−25 Cable 1550−201−101 Bracket 1550−201−102 Socket Box Cover 1550−385−010 Wire Harness w/ Socket Return to Table of Contents...
  • Page 36 Constant Descent Non−Electric Lift Base Assembly Assembly part number 1550−404 (reference only) Return to Table of Contents...
  • Page 37 55−18−0 Threaded Insert 59−75−0 Cable Tie 59−116−0 PVC Switch Box 59−118−0 Switch Box Cover 1210−30−210 3−Sided Control Base Assembly1 1231−70−10 Jack Assembly 1550−185−25 Cable 1550−201−101 Bracket 1550−201−102 Socket Box Cover 1550−385−010 Wire Harness w/ Socket Return to Table of Contents...
  • Page 38 3−Sided Control Base Assembly, Non−Electric Lift Return to Table of Contents...
  • Page 39 3−Sided Control Base Assembly, Non−Electric Lift Assembly part number 1210−30−210 (reference only) FOOT END HEAD END Return to Table of Contents...
  • Page 40 3−Sided Control Base Assembly, Non−Electric Lift DETAIL B Return to Table of Contents...
  • Page 41 3−Sided Control Base Assembly, Non−Electric Lift Item Part No. Part Name Qty. Item Part No. Part Name Qty. 715−1−11 Brake Cushion 3−47 Hex Hd. Cap Screw 715−1−61 Caster Brake Weldment 3−62 Hex Hd. Cap Screw 715−1−92 Pump Pedal Shaft 3−85 Hex Hd.
  • Page 42 Standard Caster Assembly Item Part No. Part Name Qty. 3−99 Hex Hd. Cap Screw 11−310 Washer 16−60 Hex Nut 715−2−16 Horn Assembly 715−3−96 Hex Hd. Cap Screw 715−1−265 Wheel Cover, Right 715−1−266 Wheel Cover, Left 715−2−25 Wheel 715−1−158 Caster Nut (not shown) p/n 715−259−400 −...
  • Page 43 1231−70−10 Variable Descent Jack Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 388−100−38 Plug (page Jack Base Ass’y 390−1−238 Actuator Gasket 926−20−161 Parker Packing 390−1−243 Gasket 926−20−162 Wear Ring 390−1−244 Base Gasket 4−14 Soc. Hd. Cap Screw 390−2−139 Retaining Ring 45−14...
  • Page 44 Jack Base Assembly Assembly part number 1231−70−5 (reference only) Item Part No. Part Name Qty. Item Part No. Part Name Qty. 48−147 Base Plug 926−20−154 Seal 390−2−134 Conical Comp. Spring 1210−170−13 Base Plug 715−1−307 Needle Valve 1210−270−12 Jack Base 715−1−309 Valve Plug 38−311 Compression Spring...
  • Page 45 1231−70−210 Constant Descent Jack − Non−Electric Lift Base Item Part No. Part Name Qty. Item Part No. Part Name Qty. 388−100−38 Plug 926−20−161 Parker Packing 390−1−238 Actuator Gasket 926−20−162 Wear Ring 390−1−243 Gasket (page Jack Base Ass’y 390−1−244 Base Gasket 4−14 Soc.
  • Page 46 Constant Flow Jack Base Assembly Assembly part number 5050−370−100 (reference only) Item Part No. Part Name Qty. Item Part No, Part Name Qty. 48−147 Base Plug 2025−75−87 Pin Housing 390−2−134 Conical Comp. Spring 5050−170−50 Adj. P.C. Valve Cartridge 1 715−1−309 Valve Plug 5050−370−110 Jack Base...

  • Page 47: Electric Lift Base Assembly

    Electric Lift Base Assembly Return to Table of Contents...
  • Page 48 Electric Lift Base Assembly Return to Table of Contents...
  • Page 49 Part No. Part Name Qty. Item Part No. Part Name Qty. 3−221 Hex Washer Hd. Screw 1550−201−101 Soc. Box Brkt. w/Weld Nuts 1 4−126 Hex Socket Bolt 1550−201−102 Socket Box Cover 13−38 External Tooth Lock Washer 6 1550−475−89 Pump/Motor Top Cover 16−23...
  • Page 50 Electric Lift Base Assembly Assembly part number 1550−502−1 (reference only) Return to Table of Contents...
  • Page 51 Electric Lift Base Assembly HEAD END Return to Table of Contents...
  • Page 52 Electric Lift Base Assembly Return to Table of Contents...
  • Page 53 Electric Lift Base Assembly Return to Table of Contents...
  • Page 54 −201−550 Wear Plate 52−245 Bearing 1210−201−551 Eyebolt 52−263 Tubular Spacer 1210−301−104 Slip Link Assembly BC 52− −301− BD 52−302 Flange Bearing 1550−70−65 Motor Support w/Weldnuts 52−747 Flange Bearing 1550−201−60 Switch Bracket 55−18 Threaded Insert (page Jack/Pump Motor BG 715−1−11 Brake Cushion 8815−005−800 Tooth Lock Washer...
  • Page 55 Constant Descent Electric Lift Base Assembly Return to Table of Contents...
  • Page 56 Constant Descent Electric Lift Base Assembly Return to Table of Contents...
  • Page 57 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 3−221 Hex Washer Hd. Screw 1550−201−101 Soc. Box Brkt. w/Weld Nuts 1 4−126 Hex Socket Bolt 1550−201−102 Socket Box Cover 13−38 External Tooth Lock Washer 6 1550−475−89 Pump/Motor Top Cover 16−23...
  • Page 58 Constant Descent Electric Lift Base Assembly Assembly part number 1550−503−1 (reference only) Return to Table of Contents...
  • Page 59 Constant Descent Electric Lift Base Assembly HEAD END Return to Table of Contents...
  • Page 60 Constant Descent Electric Lift Base Assembly Return to Table of Contents...
  • Page 61 Constant Descent Electric Lift Base Assembly Return to Table of Contents...
  • Page 62 −201−550 Wear Plate 52−245 Bearing 1210−201−551 Eyebolt 52−263 Tubular Spacer 1210−301−104 Slip Link Assembly BC 52− −301− BD 52−302 Flange Bearing 1550−70−65 Motor Support w/Weldnuts 52−747 Flange Bearing 1550−201−60 Switch Bracket 55−18 Threaded Insert (page Jack/Pump Motor BG 715−1−11 Brake Cushion 8815−005−800 Tooth Lock Washer...

  • Page 63: Power Cord Assembly

    Power Cord Assembly Assembly part number 1550−201−105 (reference only) Item Part No. Part Name Qty. 4−167 But. Hd. Cap Screw 16−23 Nylock Nut 34−21 P−Clamp 39−254 Power Cord Return to Table of Contents...

  • Page 64: Jack/Pump Motor Assembly

    1550−470−6 Jack/Pump Motor Assembly 1550−470−7 Constant Flow Jack/Pump Motor Assembly Return to Table of Contents...
  • Page 65 1550−470−6 Jack/Pump Motor Assembly 1550−470−7 Constant Flow Jack/Pump Motor Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 3−3 Hex Hd. Cap Screw 1550−71−8 Short Return Line 3−121 Hex Washer Hd. Screw 1550−71−1 Long Pressure Line 16−28...
  • Page 66 1550−270−15 Jack Assembly, Electric Lift Base Item Part No. Part Name Qty. Item Part No. Part Name Qty. 4−14 Soc. Hd. Cap Screw 715−1−331 Piston End 45−14 O−Ring 715−1−422 Reservoir 45−110 O−Ring 926−20−161 Parker Packing 45−904 Quad Ring 926−20−162 Wear Ring 388−100−38...
  • Page 67 Electric Lift Jack Base Assembly Assembly part number 1550−270−14 (reference only) Item Part No. Part Name Qty. Item Part No. Part Name Qty. 48−147 Hex Hd. O−Ring Plug 715−1−341 Poppet 48−150 Check Valve (page Pump Piston Ass’y 390−2−134 Compression Spring 926−20−153...
  • Page 68 1550−270−210 Constant Flow Jack − Electric Lift Base Item Part No. Part Name Qty. Item Part No. Part Name Qty. 4−14 Soc. Hd. Cap Screw 1550−70−6 Jack Cap Assembly 45−14 O−Ring 715−1−422 Reservoir 45−110 O−Ring 926−20−161 Parker Packing 45−904 O−Ring 926−20−162...
  • Page 69 Constant Flow Jack Base Assembly Assembly part number 1550−70−150 (reference only) Item Part No. Part Name Qty. Item Part No. Part Name Qty. 48−147 Hex Hd. O−Ring Plug 1210−170−13 Base Plug 48−150 Check Valve 1550−70−120 Machined Jack Base 390−2−134 Conical Comp. Spring 2025−75−87...
  • Page 70 715−100−425 Jack Pump Piston Assembly Assembly part number 715−201−325 (reference only) Item Part No. Part Name Qty. 715−1−328 Piston Wear Ring 715−1−400 O−Ring Back Up 715−200−316 Pump Cylinder 715−201−318 Pump Piston 715−201−327 Cylinder Wear Ring 14−50 Bearing Retainer 45−110 O−Ring 715−1−329 Pump Seal (not shown) Return to Table of Contents...

  • Page 71: Brake Adjuster Assembly

    715−201−150 Brake Adjuster Assembly Item Part No. Part Name Qty. 715−1−180 Cam Bearing 715−201−62 Threaded Stud Assembly 14−4 Nylon Washer 28−8 External Retaining Ring Return to Table of Contents...

  • Page 72: Brake Cam Assembly

    715−1−213 Brake Cam Assembly Item Part No. Part Name Qty. 715−1−221 Brake Cam 16−59 Fiberlock Nut 8−21 Soc. Hd. Cap Screw 715−1−173 Brake Connecting Link Return to Table of Contents...

  • Page 73: Pump Pedal Assembly

    716−201−288 Foot End Pump Pedal Assembly Item Part No. Part Name Qty. 26−145 Spring Pin 716−201−14 Foot End Pump Rod 716−1−283 Pump Pivot Housing 715−201−126 Pedal 1210−201−551 Eye Bolt 16−14 Nylock Nut 26−261 Groove Pin Return to Table of Contents...
  • Page 74 716−201−292 Head End Pump Pedal Assembly Item Part No. Part Name Qty. 26−145 Spring Pin 716−1−285 Pump Pivot Housing, Hd. End 716−201−14 Head End Pump Rod 715−201−126 Pedal 1210−201−551 Eye Bolt 16−14 Nylock Nut 26−261 Groove Pin Return to Table of Contents...
  • Page 75 Base Assembly w/Fifth Wheel Option Assembly part number 1010−260 (reference only) Item Part No. Part Name Qty. 14−79 Nylon Washer 11−13 Washer 27−16 Cotter Pin (page Pivot Rod Assembly 1210−1−145 1210−1−148 Torsion Spring 1210−201−149 Spring Spacer 4−10 Bolt (page Wheel Arm Assembly 1210−1−146 Torsion Spring 26−35...
  • Page 76 Pivot Rod Assembly Assembly part number 1210−201−2 (reference only) Item Part No. Part Name Qty. 1210−1−143 Pivot Rod 14−79 Nylon Washer 1210−1−144 Roller 28−131 Snap Ring 27−16 Cotter Pin Return to Table of Contents...
  • Page 77 715−201−125 Wheel Arm Assembly Item Part No. Part Name Qty. 1210−201−553 Wheel Arm 1210−1−147 Fifth Wheel 3−31 Hex Hd. Cap Screw 16−35 Nylock Nut Return to Table of Contents...

  • Page 78: Optional Uni−Lower Pedal Assembly

    Uni−Lower Pedal Assembly Assembly part number 1210−500 (reference only) Item Part No. Part Name Qty. 715−201−127 Uni−Lowering Pedal 715−1−333 Release Rod Stop Sleeve 25−50 Pop Rivet Return to Table of Contents...

  • Page 79: Optional Dual Lowering Pedal Assembly

    Optional Dual Lowering Pedal Assembly Assembly part number 1210−501 (reference only) Item Part No. Part Name Qty. 715−201−126 Pump Pedal 26−143 Groove Pin Return to Table of Contents...

  • Page 80: Optional Side Control Base Assembly

    Optional Side Control Brake Assembly Return to Table of Contents...
  • Page 81 Optional Side Control Brake Assembly Item Part No. Part Name Qty. 1210−301−400 Gear Box Weldment 1210−301−412 Support 1210−201−409 Side Control Brake/Steer Rod 1210−201−407 1210−301−406 Spacer 1210−301−405 Miter/Spur Gear 1210−301−404 Spur Gear 1210−301−403 Miter Gear 1210−201−401 Flange Bearing 1210−201−336 Steer Label 1210−201−335 Brake Label 1210−201−153...

  • Page 82: Base Labeling Assembly

    3−Sided Foot End Control Base Labeling Assembly Assembly part number 1550−445−101 (reference only) Item Part No. Part Name Qty. 1550−445−102 Base Hood 1550−10−134 Bellows 1210−201−335 Red Brake Label 1210−201−336 Green Steer Label 1210−201−337 Head Down Label, Foot End 1210−201−338 Foot Down Label, Foot End 946−201−60...
  • Page 83 1010−900−240 Endoscopy 1010−900−245 Radiology 1010−900−250 Nuclear Medicine 1010−900−255 Ambulatory Surgery 1010−900−260 Department Label Part No. G.I. Lab 1010−900−265 Cath. Lab 1010−900−270 Demo Stryker 1010−900−186 Same Day Surgery 1010−900−275 Ophthalmology 1010−900−187 Cardio. 1010−900−280 Outpatient Surgery 1010−900−188 Ultrasound 1010−900−285 Recovery 1010−900−189 NOTE Trauma 1010−900−190...

  • Page 84: Litter Assembly

    Litter Assembly Return to Table of Contents...
  • Page 85 Litter Assembly Return to Table of Contents...
  • Page 86 Litter Assembly Return to Table of Contents...
  • Page 87 Litter Assembly Return to Table of Contents...
  • Page 88 Litter Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1550−30−5 Frame Assembly 14−3 Washer 938−1−401 Collar 4−101 Soc. Hd. Cap Screw 28−72 Retaining Ring 1010−32−92 Foley Bag Rack 1001−40−12 Foot Board Receptacle 4−173 But. Hd. Cap Screw 23−104...
  • Page 89 Litter Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1550−33−31 Fowler Supt. Ass’y 721−31−65 Hole Plug 1550−90−5 Lockout Label 1550−26−31 Siderail Spindle Support 1550−90−13 Caution Label 1550−26−27 Guard 1550−30−30 Side Support 4−167 But. Hd. Cap Screw 1550−30−15...
  • Page 90 1211−351−010 Push Handle Assembly Item Part No. Part Name Qty. 1010−354−024 Stop Link 1211−151−018 Sleeve Assembly 0026−118−000 Roll Pin Return to Table of Contents...

  • Page 91: Siderail Assembly

    Siderail Assembly, Left & Right Assembly part numbers 1550−26−20 (Left) & 1550−26−22 (Right) FOOT END (reference only) See View P VIEW P (RIGHT SIDERAIL IS SHOWN) Item Part No. Part Name Qty. 1550−26−21 Top Rail, Left 1550−26−23 Top Rail, Right 1010−26−83...

  • Page 92: Siderail Component Housing Assembly

    Siderail Component Housing Assembly Assembly part numbers 1550−26−16 (Right) & 1550−26−17 (Left) Item Part No. Part Name Qty. 1550−26−14 Component Housing 1550−80−930 Switch Board Assembly 1550−26−11 Lexan Shield 1550−26−25 Control Labels, Rt. 1550−26−26 Control Labels, Lt. 2−5 Round Hd. Screw...

  • Page 93: Non−Quick Drop Fowler And Gatch Assembly

    Non−Quick Drop Fowler & Gatch Assembly Assembly part number 1550−36−10 (reference only) Item Part No. Part Name Qty. (page Fowler Crankscrew Ass’y (page Gatch Crankscrew Ass’y 1550−33−54 Fowler Drive Bar Weldment 1550−33−55 Spacer 1550−90−33 Fowler Engage Label 1550−90−34 Gatch Engage Label 3−68...

  • Page 94: Crankscrew Assemblies, Non−Quick Drop

    1550−233−30 Fowler Crankscrew Ass’y, Non−Quick Drop Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1550−34−13 Crk/Coupler Hsg. Ass’y, Rt. 1 26−149 Roll Pin 1550−34−1 Crank Coupler 26−179 Spiral Pin 38−286 Compression Spring 1550−1−16 Crank Handle 28−299 Snap Ring 1550−1−14...
  • Page 95 1550−234−5 Gatch Crankscrew Ass’y, Non−Quick Drop Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1550−34−14 Crk/Coupler Hsg. Ass’y, Lt. 1 26−149 Roll Pin 1550−34−1 Crank Coupler 26−179 Spiral Pin 38−286 Compression Spring 1550−1−16 Crank Handle 28−299 Snap Ring 1550−1−14...

  • Page 96: Quick Drop Assembly, Fowler Only

    Fowler Only Quick Drop Assembly Return to Table of Contents...
  • Page 97 Fowler Only Quick Drop Assembly Item Part No. Part Name Qty. 1550−33−28 Drive Bar Weldment 1550−33−14 Fow. Crkscr. Detent Ass’y 1550−33−25 Quick Drop Brkt. Ass’y, Rt. 1550−33−26 Quick Drop Brkt. Ass’y, Lt. 1550−33−19 Release Arm Weldment 1550−33−20 Handle Guard 1550−33−36 Release Label, Rt.

  • Page 98: Fowler/Gatch Quick Drop Assembly

    Quick Drop Fowler & Gatch Assembly Return to Table of Contents...
  • Page 99 Quick Drop Fowler & Gatch Assembly Item Part No. Part Name Qty. 1550−33−28 Drive Bar Weldment 1550−33−14 Fowler Crkscr. Detent Ass’y 1550−33−25 Quick Drop Brkt. Ass’y, Rt. 1550−33−26 Quick Drop Brkt. Ass’y, Lt. 1550−33−19 Release Arm Weldment 1550−33−20 Handle Guard 1550−33−36...

  • Page 100: Push Handle Assembly

    1550−33−30 Fowler Crankscrew Assembly, Quick Drop Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1550−34−13 Crk/Coupler Hsg. Ass’y, Rt. 1 26−149 Roll Pin 1550−34−1 Crank Coupler 26−179 Spiral Pin 38−286 Compression Spring 1550−1−16 Crank Handle 28−299 Snap Ring 1550−1−14...
  • Page 101 1550−34−5 Gatch Crankscrew Assembly, Quick Drop Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1550−34−14 Crk/Coupler Hsg. Ass’y, Lt. 1 26−149 Roll Pin 1550−34−1 Crank Coupler 26−179 Spiral Pin 38−286 Compression Spring 1550−1−16 Crank Handle 28−299 Snap Ring 1550−1−14...

  • Page 102: Removable I.v. Pole Assembly

    390−25 Standard, Removable I.V. Pole Assembly Item Part No. Part Name Qty. 24−23 Plastic Knob 390−3−53 Double I.V. Ass’y 393−3−43 Tube Assembly 4−496 Soc. Hd. Cap Screw Return to Table of Contents...

  • Page 103: Optional 2−Stage I.v. Pole Assembly

    Optional 2−Stage I.V. Pole Mounting Assembly Assembly part numbers 1510−280 (Foot End) 1510−281 (Head End) FOOT END HEAD END Item Part No. Part Name Qty. (page 102) I.V. Pole Assembly 1001−259−103 I.V. Pivot 0016−118−000 Nyock Nut 0004−452−000 But. Hd. Cap Screw 0003−356−000 Hex Hd.
  • Page 104 1211−210−10 Optional 2−Stage I.V. Pole Assembly Item Part No. Part Name Qty. 8−31 Soc. Hd. Cap Screw 52−17 Washer 926−400−162 Spacer 1211−210−29 2nd Stage Assembly 1001−359−13 Dampener 1001−159−28 Base Tube 1010−59−16 I.V. Hook (page 103) I.V. Pole Latch 1001−359−112 Pivot Return to Table of Contents...

  • Page 105: Optional I.v. Pole Latch Assembly

    1211−210−26 Optional I.V. Pole Latch Assembly Item Part No. Part Name Qty. 28−167 Retaining Ring 31−4 Steel Ball 38−392 Crest−to−Crest Spring 1211−91−34 Release Label 1211−110−18 I.V. Latch Seal 1211−110−20 Washer 1211−110−21 I.V. Latch Locking Pin 1211−110−22 I.V. Latch Guide 1211−110−24 I.V.

  • Page 106: Optional 3−Stage I.v. Mounting Assembly

    Optional 3−Stage I.V. Mounting Assembly Assembly part numbers 1510−61 (Head End) 1510−62 (Foot End) FOOT END HEAD END Item Part No. Part Name Qty. (page 105) I.V. Pole Assembly 1001−259−103 I.V. Pivot 16−28 Fiberlock Nut 4−199 But. Hd. Cap Screw 3−50 Hex Hd.
  • Page 107 1211−211−10 Optional 3−Stage I.V. Pole Assembly Item Part No. Part Name Qty. 7−4 Truss Hd. Machine Screw 26−76 Roll Pin 52−17 Spacer 1211−210−31 2nd Stage Assembly 926−400−162 Spacer (page 106) 3rd Stage Assembly 1001−161−23 Base Tube 1010−59−16 I.V. Hook 1010−61−14 Collar (page 103)
  • Page 108 1211−110−32 Optional 3rd Stage Assembly NOTE Item F, part number 1010−61−18 is left hand thread. When removing it, turn clockwise to loosen it. Item Part No. Part Name Qty. 31−21 Ball 38−303 Compression Spring 1010−61−13 Ball Retainer 1010−61−16 Retaining Shaft 1010−61−17 Thumb Knob 1010−61−18...

  • Page 109: Optional Upright Oxygen Bottle Holder Assembly

    1020−30 Optional Upright Oxygen Bottle Holder Ass’y Item Part No. Part Name Qty. 1020−30−11 Upright Bottle Holder 27−12 Cotter Pin 1020−30−17 Specification Label Return to Table of Contents...

  • Page 110: Foot Board/Chartholder Assembly

    0785−045−500 Foot Board/Chartholder Assembly BACK FRONT Item Part No. Part Name Qty. 0785−045−402 Push/Pull Label 0785−045−501 Foot Board Label 0785−045−511 Chartholder 0785−045−512 Foot Board Back 0785−045−513 Foot Board Front 0785−045−514 Small Standoff 0785−045−515 Large Standoff 0946−029−010 Support Weldment Return to Table of Contents...

  • Page 111: Optional Fowler X−Ray Cassette Assembly

    1001−23 Optional X−Ray Cassette Mounting Assembly Item Part No. Part Name Qty. (page 110) X−Ray Cassette Ass’y 16−121 Self−Locking Nut 4−456 Button Hd. Cap Screw 1001−23−13 Tray Latch 1020−23−13 Tray Hinge, Right 1020−23−12 Tray Hinge, Left 25−86 Pop Rivet Return to Table of Contents...
  • Page 112 1001−23−10 Optional Fowler X−Ray Cassette Ass’y Item Part No. Part Name Qty. 1001−23−12 Tray 1020−23−16 Post Housing 1001−23−14 Actuating Rod 926−23−64 Post 1010−23−37 Rod Guide 1020−23−21 Knob 1010−23−28 Tray Angle 926−23−70 Block Assembly 926−23−69 Washer 14−3 Washer 38−122 Compression Spring 1020−23−26 Spacer 1020−23−19...

  • Page 113: Optional Defibrillator Tray Assembly

    0785−045−200 Defibrillator Tray Assembly Strap Securing Detail Item Part No. Part Name Qty. 0002−044−000 Round Hd. Machine Screw 0025−055−000 Rivet 0029−008−000 Dual Lock 0029−010−000 Dual Lock 0785−045−201 Defib Tray Label 0785−045−402 Push/Pull Label 0785−045−403 Weight Capacity Label 0785−045−204 Tray Support 0785−045−207 Tray 0785−045−208...

  • Page 114: Defib Tray/Foot Extender/Foot Board Assembly

    0785−045−400 Defib Tray/Foot Extender/Foot Board Item Part No. Part Name Qty. 0004−215−000 But Hd. Cap Screw 0008−049−000 Soc. Hd. Cap Screw 0014−020−000 Washer 0014−120−000 Washer 0016−028−000 Hex Nut 0037−052−000 Rubber Bumper 0038−133−000 Compression Spring 0052−017−000 Spacer 0785−045−402 Push/Pull Label 0785−045−403 Weight Capacity Label 0785−045−401 Foot Extender/Defib Tray Label...

  • Page 115: Serving Tray Assembly

    0785−045−700 Optional Serving Tray Assembly Item Part No. Part Name Qty. 0785−045−701 Serving Tray Label 0785−045−704 Flat Hd. Torx Screw 0785−045−705 Serving Tray Top 0785−045−706 Serving Tray Pinion 0785−045−710 Serving Tray Slider 0785−045−715 Serving Tray Cover 0785−045−403 Weight Capacity Label Return to Table of Contents...

  • Page 116: Foot Board/Serving Tray Holder

    0785−045−800 Optional Foot Board/Serving Tray Holder Item Part No. Part Name Qty. 0025−079−000 Rivet 0785−045−402 Push/Pull Label 0785−045−801 Serving Tray Holder Label 0785−045−805 Foot Board 0785−045−806 Front Plate 0785−045−810 Foot Board Support Weldment 0946−001−155 Bumper 0025−133−000 Dome Head Pop Rivet Return to Table of Contents...

  • Page 117: Optional C−Spine Cassette Holder Assembly

    1550−70−101 Optional C−Spine Cassette Holder Ass’y Power Cord Hook 1550−30−25 Item Part No. Part Name Qty. 3−356 Hex Hd. Cap Screw 3−359 Hex Hd. Cap Screw 4−54 But. Hd. Cap Screw 11−2 Washer 11−447 Washer 16−118 Nylock Nut (page 116) Support Pole Assembly 1001−70−11...

  • Page 118: Optional C−Spine Support Pole Assembly

    Optional C−Spine Support Pole Assembly Assembly part number 1010−70−10 (reference page 115) (reference only) View A−A Item Part No. Part Name Qty. 1010−70−33 Support Tube Cap 26−6 Roll Pin 1010−70−34 Support Arm Weldment 1010−70−42 Cassette Holder Weldment 1010−70−50 Adjustment Tube Weldment 1010−70−30 Base Tube Weldment 1010−70−45...
  • Page 119 Optional C−Spine Storage Bracket Assembly (reference page 115) Assembly part number 1010−70−19 (reference only) 6.5” (Ref.) 2” (Ref.) Item Part No. Part Name Qty. 1010−70−20 Storage Bracket Weldment 1010−70−45 Knob 1010−70−23 Storage Label Return to Table of Contents...

  • Page 120: Optional O2 Bottle Retainer Assembly

    1040−10−90 Optional O@ Bottle Retainer Assembly Base Hood Item Part No. Part Name Qty. 1040−10−91 Bottle Retainer 1040−10−92 Scrulok Fastener Return to Table of Contents...

  • Page 121: Optional Scale System

    1550−330−010 Optional Scale System Assembly Return to Table of Contents...
  • Page 122 1550−330−010 Optional Scale System Assembly HEAD END Return to Table of Contents...
  • Page 123 1550−330−010 Optional Scale System Assembly Return to Table of Contents...
  • Page 124 1550−330−010 Optional Scale System Assembly Return to Table of Contents...
  • Page 125 1550−330−010 Optional Scale System Assembly DETAIL C Bottom View Return to Table of Contents...
  • Page 126 1550−330−010 Optional Scale System Assembly Item Part No. Part Name Qty. 1550−30−5 Frame Assembly 1550−85−40 Umbilical Cord Guide 28−72 Retaining Ring 1001−40−12 Foot Board Receptacle 23−104 Self−Tapping Screw 926−400−142 Corner Wheel 1010−201−27 Bumper Extrusion 1010−201−27 Bumper Extrusion 1001−1−36 End Plug 49−1...
  • Page 127 1550−330−010 Optional Scale System Assembly Item Part No. Part Name Qty. 14−3 Washer 4−101 Soc. Hd. Cap Screw 1010−32−92 Foley Bag Rack 4−173 But. Hd. Cap Screw 7−20 Truss Hd. Mach. Screw 8−15 Shoulder Bolt 13−10 Ext. Tooth Lock Washer 1550−90−15...
  • Page 128 1550−330−010 Optional Scale System Assembly Item Part No. Part Name Qty. 1550−33−31 Fowler Supt. Ass’y 1550−90−5 Lockout Label 1550−90−13 Caution Label 1550−30−30 Side Support 1550−30−15 Motor Bracket 4−7 Soc. Hd. Cap Screw 16−3 Fiberlock Nut 34−255 Cable Clamp 21−171 Set Screw 1550−33−31...

  • Page 129: Mattress And Siderail Pads

    ........part # 1550−430−40 Mattress, 4”...

  • Page 130: Limited Warranty

    Stryker’s obligation under this warranty is expressly limited to supplying replacement parts and labor for, or replacing, at its option, any product which is, in the sole discretion of Stryker, found to be defective. If re- quested by Stryker, products or parts for which a warranty claim is made shall be returned prepaid to Stryker’s factory.

  • Page 131: Return Authorization

    Stryker will perform all service during regular business hours (9−5) * Replacement parts and labor for products under PM contract will be discounted. ** Does not include any disposable items, I.V. poles (except for Stryker HD permanent poles), mattresses, or damage re- sulting from abuse.
  • Page 132 European Representative Stryker EMEA RA/QA Director Stryker France ZAC Satolas Green Pusignan Av. De Satolas Green 69881 MEYZIEU Cedex France 3800 E. Centre Ave., Portage, MI 49002 (800) 327−0770 www.stryker.com JH 05/07 1550−490−027 REV H...

Table of Contents