Projecta AC040 Manual page 10

Q. Can I use the charger as a power supply?
A. Projecta 8 Stage chargers are designed to only supply power to the battery clips when
they are connected correctly to a battery. This is to prevent sparks during connection
to the battery or if connected incorrectly by mistake. This safety feature prevents the
charger from being used as a 'Power Supply'
Q. How can I tell what stage the battery charger is in?
A. Look at the gauge at the bottom of the display and voltage to determine at what point
the charger is at.
Q. I have connected my charger to the battery and the display shows 0.00V.
A. Check to make sure the battery charger clamps are correctly connected to the battery
posts or battery terminal.
Check to make sure the battery clamps are connected Positive (Red) clamp to the
positive post of the battery and the Negative (Black) clamp is connected to the
Negative post on the battery.
10