Drying - Bosch HNG6764W6 Instruction Manual

Start
Caution!
Damage to the appliance: Use only liquid descalers
■
that are recommended by us for the descaling
programme. The time the product needs to work
during descaling depends on the type of descaler
used. Other descalers may damage the appliance.
Descaler order no. 311 680
Descaling solution: Do not allow any descaling
■
solution or descaler to come into contact with the
control panel or other delicate surfaces. This will
damage the surfaces. If this does happen, remove
the descaling solution immediately with water.
If you have used a steam-assisted operation
immediately before descaling, you must first switch the
appliance off so that the residual water is pumped out
of the evaporator system.
Mix 400 ml water with 200 ml liquid descaler to
1.
make a descaling solution.
Use the ÿ On/Off button to start.
2.
Remove the water tank and fill with descaling
3.
solution.
Fully insert the water tank filled with the descaling
4.
solution.
Close the control panel.
5.
Touch the Menu field.
6.
The list of operating modes is displayed.
Touch the "Cleaning" text field.
7.
Touch the "Descaling" text field.
8.
The duration of the descaling programme is
displayed. It cannot be changed.
Press the l Start/Stop button to start.
9.
The appliance is descaled. The time counts down on
the display.
Once the cooking time has elapsed, an audible signal
sounds.
First rinsing cycle
Open the control panel.
1.
Remove the water tank, rinse thoroughly, fill with
2.
water and reinsert.
Close the control panel.
3.
Press the l Start/Stop button to start.
4.
The appliance rinses.
Once the duration has elapsed, an audible signal
sounds.
Second rinsing cycle
Open the control panel.
1.
Remove the water tank, rinse thoroughly, fill with
2.
water and reinsert.
Close the control panel.
3.
Press the l Start/Stop button to start.
4.
The appliance rinses.
Once the duration has elapsed, an audible signal
sounds.
Rinsing
Open the control panel.
1.
Empty and dry the water tank.
2.
Press the # On/Off button to switch off the
3.
appliance.
Descaling is complete and the appliance is ready for
use again.

Drying

Dry the cooking compartment after operation to ensure
that no moisture remains.
Starting drying
During drying, the cooking compartment is heated up
so that the moisture in the cooking compartment
evaporates. Then open the appliance door so that the
steam escapes.
Caution!
Enamel damage: Do not start any operations when
there is water on the cooking compartment floor. Before
operation, wipe away the water from the cooking
compartment floor.
Leave the appliance to cool down.
1.
Remove the worst dirt from the cooking
2.
compartment immediately and wipe away moisture
from the cooking compartment floor.
If necessary, press the # On/Off button to switch on
3.
the appliance.
Touch the Menu field.
4.
The options for selecting an operating mode are
displayed.
Touch the "Cleaning" text field.
5.
Touch the "Drying" text field.
6.
The duration is displayed. It cannot be changed.
Press the l Start/Stop button to start.
7.
The drying function starts and ends automatically
after 10 minutes.
Open the appliance door and leave it open for 1 to 2
8.
minutes so that the moisture in the cooking
compartment can escape.
Drying the cooking compartment by hand
Leave the appliance to cool down.
1.
Remove any dirt from the cooking compartment.
2.
Dry the cooking compartment with a soft cloth.
3.
Leave the appliance door open for one hour so that
4.
the cooking compartment dries completely.
Cleaning function
en
37