Intex PureSpa SB-HSWF10 Owner's Manual page 19

OPERATION (continued)
Function ON OFF








NOTE: Keep the spa control panel within 5m (16ft) range of the control base to ensure good
wireless transmission signal.
The spa control panel is resistant to water, but it is not designed to be completely submerged.
Do not put the control panel in the water. Submersion could cause water to enter the panel
causing damage to the electronics.
S AVE THESE INSTRUCTIONS
Information shown on LED display alternates between
Remaining fi lter pump time and water temperature



Remaining HST time and water temperature


Remaining HST time and water temperature fi rst.
Then remaining HDT time and water temperature.

Remaining HDT time and water temperature

(353PO) SPA ENGLISH 7.5" X 10.3" PANTONE 295U 02/03/2023
353
English
PO
Page 19