Table of Contents
Advertisement
GB
SGM
Display Setting
Shut off time
With this function you can shut off the LCD display after 2 to 59 minutes. Turn the encoder in order to select
the desired shut off time.
Temperature C/F
With this function, Display the temperature for Celsius or Fahrenheit.
Initial effect
With this function, Display initial effect position.
Wireless DMX
From factory, this projector is prepared for wireless data transmission (W-DMX). If you wish to de-activate
W-DMX control, you can select the function "De-activate WDMX" by turning the encoder. With the function
"rest", you can log out the projector from the wireless sender.
Reset Default
With this function, you can select restore factory set for ON or OFF, the default is OFF.
RESET-FUNCTIONS
With this function you can reset the device via the Control Board. You can select the different reset functions
by turning the encoder.
EFFECT ADJUST
Test function of each channel
With this function you can test each channel on its (correct) function.
Lamp adjustment
With this function, you can adjust the lamp more easily. All effects will be canceled, the shutter opens and
the dimmer intensity will be set to 100 %. With the individual functions, you can focus the light on a flat
surface (wall) and erform the fine lamp adjustment.
Calibrate values
With this function, you can calibrate and adjust the effect wheels to their correct positions. The password of
calibrate values is 050.
USERS MODE SET
In this menu, user can select different channels list by different sequence:
For example, after the user enter this manual, if select Auto Program = CH 22, means in this User's mode,
the "Dimmer" is in Channel 16.
User mode
With this function, you can create user defined channel orders.
Preset User mode
With this function, you can adjust the rest user defined channel order.
EDIT PROGRAM
Select program
With this function, you can select the program for the Program Run.
Edit program
With this function, you can edit the internal programs.
Edit scenes
With this function, you can edit the scenes of the internal programs.
Auto scenes rec.
The moving head features an integrated DMX-recorder by which you can transmit the programmed scenes
from your DMX-controller to the moving head. Adjust the desired scene numbers via the encoder (from – to).
When you call up the scenes at your controller, they will automatically be transmitted to the moving head.
１６
XM350 V1.0 NR
Idea Beam 300
Advertisement
Table of Contents
