Table of Contents
Advertisement
6. insert the filter into the filter housing and press as far as it
will go (fig. 31a).
7. Close the tank with the lid (fig. 31B), and then replace the
tank in the machine.
When you install the filter you must notify the appliance of its
presence.
8. press the MENU button to access the menu;
9. press the
or
filter" is displayed.
10. press the button
11. The message "enable?" appears on the display.
12. press the
button to confirm selection. "TurN
STEAM KNOB" appears on the display.
13. place a container under the cappuccino maker (min.
capacity of 100 ml).
14. Turn the steam knob (fig. 5). "hoT WaTer Confirm?" is
displayed.
15. press the
button to confirm selection. The appliance
begins hot water delivery and the message "please wait"
is displayed.
16. Once delivery is completed, "TURN STEAM KNOB" is
displayed.
17. Turn the steam knob to the 0 position (fig. 5). The
appliance automatically resets to "Coffee ready" status.
The filter is now active and indicated by an asterisk displayed
in the menu under the item "install filter". you can now use the
coffee machine.
Replacing the filter
When the message "replace filter" is displayed or after two
months (see date indicator) or when the appliance has not
been used for 3 weeks, you should replace the filter.
1. remove the water tank and used up filter;
2. Take the new filter out of its packet and proceed as
illustrated in points 3, 4, 5 and 6 in the previous section.
3. place a container under the cappuccino maker (min.
capacity of 100 ml).
4. press the MENU button to access the menu;
5. press the
or
filter" is displayed.
10. press the
button;
11. The message "Confirm?" is displayed.
12. press the
button to confirm selection. "TurN
STEAM KNOB" appears on the display;
13. Turn the steam knob. "hoT WaTer Confirm?" is displayed.
14. press the
button to confirm selection. The appliance
begins hot water delivery and the message "please wait"
is displayed.
15. Once delivery is completed, "TURN STEAM KNOB" appears
on the display. Turn the steam knob to the 0 position. The
button repeatedly until "install
.
button repeatedly until "replace
appliance automatically resets to "Coffee ready" status.
The new filter is now active and you can use the coffee
machine.
Removing the filter
if you want to continue use the appliance without the filter, you
must remove it and notify the appliance of its removal. proceed
as follows:
1. remove the water tank and used up filter;
2. press the MENU button to access the menu;
3. press the
or
filter" is displayed.
4. press the button
5. The message "disable?" appears on the display;
6. press the
button to confirm and the meNu button
to exit the menu.
TECHNICAl DATA
voltage:
absorbed power:
pressure:
max. capacity water tank:
Size: lxhxd:
Cable length:
Weight:
max. capacity beans container:
The appliance complies with the following eu directives:
•
EC Regulation 1275/2008 for standby;
•
low voltage directive 2006/95/eC and subsequent
amendments;
•
emC
directive
amendments;
•
all materials and accessories coming into contact with
food conform to eC regulation 1935/2004.
DISPOSAl
in compliance with european directive 2002/96/eC,
the appliance must not be disposed of with
household waste, but taken to an authorised waste
separation and recycling centre.
16
button repeatedly until "install
;
220-240 v~ 50/60 hz max. 10a
1450W
15 bar
1,8 litres
238x345x430 mm
1,15 m
9,1 Kg
250 g
2004/108/eC
and
subsequent
Advertisement
Table of Contents
Troubleshooting
