Montigo Phenom PL38 Installation & Maintenance Manual page 44

Hide thumbs Also See for Phenom PL38:
Table of Contents

Advertisement

Disabling Thermostat
Some jurisdictions and bedroom installations require the
thermostat to be disabled.
1. Partially take out one battery, see Figure 27k.
2. Insert the battery while holding down the thermostat button.
The remote screen will display 'Clr' while the button is held
down. See Figure 27l.
3. To enable thermostat repeat steps 1-2. The remote screen will
display 'set' while the thermostat button is held down.
44
Figure 27.k
Figure 27.l
Fan Speed Control
Fan Speed Control
The fireplace is equipped with optional hot air circulating fans.
The fireplace is equipped with optional hot air circulating fans.
The speed of the fans can be controlled by the Proflame system.
The speed of the fans can be controlled by the Proflame system.
The fan speed can be adjusted through six (6) speeds. To activate
The fan speed can be adjusted through six (6) speeds. To activate
this function use the Mode Key, see Figure 27, to index to the fan
this function use the Mode Key, see Figure 27, to index to the fan
control icon, see Figure 27m. Use the Up/Down Arrow Keys to
control icon, see Figure 27m. Use the Up/Down Arrow Keys to
turn on, off, or adjust the fan speed. A single "beep" will confirm
turn on, off, or adjust the fan speed. A single "beep" will confirm
reception of the command.
reception of the command.
Figure 27.m Fan Speed Control
Accent Light Control (P units only)
The fireplace may be equipped with accent lights. The auxiliary
function controls the Accent Lights. To activate this function use
the Mode Key, see figure 27, to index to the AUX icon, see figure
27n.
Pressing the Up Arrow Key will turn the light on. Pressing the
Down Arrow Key will turn the light off. A single "beep" will
confirm the reception of the command.
Figure 27.n Light Control
Operation
XG0199 - 170223

Advertisement

Table of Contents
loading

Table of Contents