Table of Contents
Advertisement
13
WHEELS, TIRES
13.4
Installing the rear wheel
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents No braking effect when operating the rear brake.
–
After installing the rear wheel, always operate the foot brake until the pressure point is reached.
Main work
–
Check the rear hub cush drive.
–
Remove bushing
shaft seal rings.
Long-life grease (
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Replace the wheel bearing.
C00341-10
–
Install the bushing.
–
Clean the thread of the axle and nut.
–
Clean the mating surfaces of the brake caliper frame and swingarm.
(
p. 187)
. Clean and grease the mating surfaces of the bushing and the
p. 262)
185
Advertisement
Table of Contents
