Table of Contents
Advertisement
10
TUNING THE CHASSIS
10.24
Subframe position
–
Position the distance sleeve.
–
Mount and tighten screw
Guideline
Remaining frame bolts
–
Tighten screw
Guideline
Screw, handlebar stub
600986-11
–
Repeat the adjustments on the other handlebar stub.
–
Carefully move the handlebar to and fro over the entire steering range.
»
If a component restricts the freedom of movement of the steering or comes into
contact with the trim:
–
The subframe can be mounted in two different positions. This enables the seat to be posi-
tioned at an ergonomic height.
Seat height
Seat height
400439-10
.
.
Establish freedom of movement and reposition the component.
805 mm (31.69 in)
825 mm (32.48 in)
(standard)
M5
5 Nm (3.7 lbf ft)
M8
20 Nm
(14.8 lbf ft)
151
Advertisement
Table of Contents
