Table of Contents
Advertisement
6.5 Auto-off
Auto-off can be set so that if the appliance is not being used, it
will switch off after 15 or 30 minutes or after 1 or 3 hours have
elapsed.
To programme Auto-off, proceed as follows:
1. Press the settings menu (C6) (fig. 14);
2. Scroll through the menu pages until "Set Auto-off" is
displayed;
3. Select the desired time interval (15 or 30 minutes, or 1 or
3 hours).
4. Press "X" to save the new selection and go back to the
homepage (C).
6.6 Coffee temperature
To change the temperature of the water used to make coffee,
proceed as follows:
1. Press the settings menu (C6) (fig. 14);
2. Scroll through the pages until the item "Coffee tempera-
ture" is displayed;
3. Press "Set";
4. Select the required temperature from those suggested;
5. Press "<" to go back to the settings menu.
Please note:
The effect of varying the temperature is most noticeable with
long drinks.
6.7 Support
1. Press the settings menu (C6) (fig. 14);
2. Scroll through the menu pages until the item "Support" is
displayed;
3. Scan the QR code to see the manual and access support
services;
4. Press "X" to go back to the homepage (C).
6.8 Cleaning the milk carafe
The machine offers a tutorial on thorough cleaning of the milk
carafe (E), which will ensure smooth operation of the Lattecre-
ma system over time.
1. Press the settings menu (C6) (fig. 14);
2. Scroll through the pages until the item "Cleaning the milk
carafe" is displayed;
3. Press "Next" or "Back" to read the sequence of steps;
4. At the last step, press "Done" to go back to the settings
menu;
5. Press "X" to go back to the homepage (C).
Please note:
The procedure is illustrated in section "Cleaning the milk carafe
(E)".
6.9 Statistics
This function displays statistics relating to the machine. To view
the statistics, proceed as follows:
1. Press the settings menu (C6) (fig. 14);
2. Scroll through the pages until the item "Statistics" is dis-
played along with the main statistical data: to view more
data, press "Read more";
3. Press "<" to go back to the settings menu.
4. Press "X" to go back to the homepage (C).
6.10 Languages
To change the language on the homepage, proceed as follows:
1. Press the settings menu (C6) (fig. 14);
2. Scroll through the pages until the item "Languages" is
displayed;
3. Press "Set";
4. Press the flag corresponding to the desired language (scroll
through the pages to see all the languages available). the
display updates immediately and shows the selected
language;
5. Press "<" to save the new selection and go back to the
settings menu.
6.11 Coffee grinder settings
The machine offers a tutorial on how to adjust the grinding and
ensure the best results:
1. Press the settings menu (C6) (fig. 14);
2. Scroll through the pages until the item "Coffee grinder set-
tings" is displayed;
3. Press "Read more" to view the tutorial on how to adjust for
finer or coarser grinding. Press"Next" or "Back" to read the
advice;
4. When at the final page, press "Ok" to go back to the set-
tings menu;
5. Press "X" to go back to the homepage (C).
Please note:
•
After completing the above procedure, at least 3 coffees
should be made before making any further adjustment.
If coffee delivery is still not correct, repeat the procedure.
•
The adjustment dial (A2) must be turned only when the
coffee grinder is in operation, during the initial step of pre-
paring the coffee.
6.12 Water hardness
To change the default water hardness setting when the machine
is used for the first time, proceed as follows:
1. Repeat the hardness test as indicated in the section "Meas-
uring water hardness";
2. Press the settings menu (C6) (fig. 14);
3. Scroll through the pages until the item "Water hardness"
is displayed.
4. Press "Set".
5. Select the water hardness level on the display according to
the result of the test: the new setting will be stored.
9
Advertisement
Table of Contents
Troubleshooting
