Preparation | Connecting to the PCR-WEA
Connecting the Output Cable (between PCR-WEA and
OT03-PCR-WEA)
Connection on the PCR-WEA side
See "Connecting the Load" in the PCR-WEA Series User's Manual to connect the cable to the OUTPUT
terminal.
Connection on the OT03-PCR-WEA side
WARNING
1
Turn off all devices that you will connect.
2
Unfasten the two M3 screws from the INPUT terminal cover, and remove the cover.
10
User's Manual
When connecting the PCR3000WEA2 and this product with the output cable, remove the
short bar attached to the OUTPUT terminal block of the PCR3000WEA2 before connecting.
Risk of electric shock. Be sure to attach the terminal cover.
If you use cables with unnecessarily high current capacity, it may become impossible
to attach the terminal cover.
M3
OT03-PCR-WEA