Ethercat Set Access - ADF Web HD67E15-A1 User Manual

Industrial Electronic Devices

ETHERCAT SET ACCESS:

By Pressing the "EtherCAT Set
appears (Fig. 4).
This section is used to define the EtherCAT variables readable by the EtherCAT Master (Slave To Master) and the EtherCAT variables
writeable by the EtherCAT Master (Master To Slave).
S T M
LAVE O ASTER
Figure 4a: "EtherCAT Slave Set Access
The means of the fields are:
If the field "Enable" is checked, the EtherCAT variable is enabled;
In the field "Type" the data format of the EtherCAT variable is defined;
In the field "Lenght" the dimension of the EtherCAT variable is defined;
In the field "Name" the name of the EtherCAT variable is defined;
In the field "Init Value" the default value of the EtherCAT variable is defined;
In the field "Position" the starting address of the EtherCAT array where the variable is mapped is defined;
In the field "Start Bit" the starting bit of the selected Position where the variable is mapped is defined;
In the field "Mnemonic" a description of the variable is defined.
ADFweb.com S.r.l.
Access" button from the main window for SW67E15 (Fig. 2) the window "EtherCAT Slave Set Access"

User Manual EtherCAT Slave / IEC61850 Server
Document code: MN67E15_ENG
Slave To Master" window
Revision 1.000 Page 18 of 28