ADF Web HD67E67-A1 User Manual page 18

Industrial Electronic Devices
E :
THERNET
The means of the fields for the "Ethernet" section are:
In the fields "IP ADDRESS" the IP address of Ethernet side of the converter is
defined;
In the fields "SUBNET
is defined;
In the fields "GATEWAY" the default gateway of the network is defined. This
feature can be enabled or disabled pressing the Check Box field. This feature is
used for going out of the net.
TLS (T L S
RANSPORT AYER ECURITY
This section is used to define the parameters of TLS protocol. The means of the fields
are:
If the field "Enable TLS" is checked, the TLS protocol for secure connection is
enabled;
If the field "Server Authentication" is checked, the authentication of the
Server using TLS is enabled. If enabled, in the field
certificate from the Server is defined;
If the field "Client Authentication" is checked, the authentication of the Client
using TLS is enabled. If enabled:
in the field "Client
o
in the field "Client
o
in the field "Client Key
o
the Client is defined.
ADFweb.com S.r.l.
Mask" the SubNet Mask of Ethernet side of the converter
):
Certificate" the certificate from the Client is defined;
Key" the private key of the Client is defined;
Password" the password for the private key of
User Manual EtherCAT Master / MQTT
Document code: MN67E67_ENG
Figure 3e: "Set Communication
window
"Server Certificate" the
Figure 3f: "Set Communication
Revision 1.000 Page 18 of 31
 Ethernet"
 TLS" window