Advertisement
DIGITAL PROPORTIONAL R/CSYSTEM
Power supply:
DC4-8.4V, can be installed into the battery compartment using four No. 5 batteries, as shown in the following
figure,
Alternatively, insert a 2S lithium battery into the battery compartment socket, as shown in the following
figure,
You can also use an external power supply to connect to the DC power socket on the right side of the remote
control, as shown in the following
from the remote control battery compartment first.
详细说明
DETAILED DESCRIPTION
figure,When using an external power supply, please Remove the battery
This DC port is not a charging
port,Cannot charge, only
available External connection
to simulator teaching Power
usage This DC port is not a
charging port,Cannot charge,
only available External
connection to simulator
teaching Power usage
2.4GHz
FHSS
www.microzone.cn
Advertisement
Need help?
Do you have a question about the 6C-MINI and is the answer not in the manual?
Questions and answers
how do i conect to picasim on laptop with the 6c mini microzone
To connect the Microzone 6C-MINI to a flight simulator like Picasim on a laptop, follow these steps:
1. Get a 3.5mm Male-to-Male Audio Cable – Connect one end to the transmitter and the other to the microphone input on your PC.
2. Set the Transmitter to Mode 1 – Ensure the transmitter is in Mode 1 for standard control layout.
3. Download Required Software – Install SmartPropoPlus (a free tool that allows audio-based RC transmitter input) on your PC.
4. Install Picasim – Download and install the Picasim simulator.
5. Configure SmartPropoPlus – Open it and ensure it detects your transmitter’s input through the microphone port.
6. Calibrate Controls – In the simulator, calibrate the transmitter channels for correct stick movement.
This setup allows your Microzone 6C-MINI to act as a joystick input for the simulator.
This answer is automatically generated
reinitialisation of the machine