Advertisement
DIGITAL PROPORTIONAL R/CSYSTEM
External antenna
Contact frequency alignment
After the receiver is powered
on, press the touch button to
turn on the power switch of
the remote control, and the
frequency matching is
successful
Built-in antenna
Contact frequency alignment
After the receiver is powered
on, press the touch button to
turn on the power switch of
the remote control, and the
frequency matching is
successful
RECEIVER FUNCTION ANALYSIS
MC6RE-V2
MC7RB-V2
1 SBUS signal
}
(-)negative
(S)signal
electrode
(+)positive electrode
}
(-)negative
(S)signal
electrode
(+)positive electrode
2.4GHz
FHSS
6 PWM signal
1 SBUS signal
7 PWM signal
www.microzone.cn
Advertisement
Need help?
Do you have a question about the 6C-MINI and is the answer not in the manual?
Questions and answers
how do i conect to picasim on laptop with the 6c mini microzone
To connect the Microzone 6C-MINI to a flight simulator like Picasim on a laptop, follow these steps:
1. Get a 3.5mm Male-to-Male Audio Cable – Connect one end to the transmitter and the other to the microphone input on your PC.
2. Set the Transmitter to Mode 1 – Ensure the transmitter is in Mode 1 for standard control layout.
3. Download Required Software – Install SmartPropoPlus (a free tool that allows audio-based RC transmitter input) on your PC.
4. Install Picasim – Download and install the Picasim simulator.
5. Configure SmartPropoPlus – Open it and ensure it detects your transmitter’s input through the microphone port.
6. Calibrate Controls – In the simulator, calibrate the transmitter channels for correct stick movement.
This setup allows your Microzone 6C-MINI to act as a joystick input for the simulator.
This answer is automatically generated
reinitialisation of the machine