Microzone 6C-MINI Product Manual page 14

DIGITAL PROPORTIONAL R/C
SYSTEM
SW function selection:
After turning on, press the (THR+RUD) key to switch the SW key function, as shown in the following figure;
Travel volume switching:
turned off, it is restored;
Channel 2 lock: When opened, channel 2 locks the current value, After returning to the center, it pulls up one
gear and down one gear, with 5 in each direction Gears.
Low pressure alarm:
Alarm for 4 dry batteries below 4V, and alarm for 2S lithium batteries below 7V.
Restore factory settings:
After turning on the computer, press the (MIX+AIL) key to reset, as shown in the following figure, All settings
except for the joystick calibration values are restored.
No action shutdown:
In a non speed locked state, the remote control will automatically shut down after 15 minutes of inactivity,
and will not automatically shut down when in a speed locked state Power off.
Suggestions for safe shutdown:
To ensure the safety of the aircraft model and oneself, after the aircraft model motor stops running, first turn
off the power supply of the model, and then turn it off again Turn off the transmitter power.
When the function is turned on, the customized travel volume is output, and when
2.4GHz
FHSS
www.microzone.cn