5
CONNECTING TO THE BACNET ROUTER
The FieldServer Toolbox Application can be used to discover and connect to the BACnet Router on a
local area network. To connect to the BACnet Router over the Internet using Toolbox, add the Internet
exposed IP Address of the Router by clicking on the
exposed IP Address in a web browser directly.
5.1
Using the FieldServer Toolbox
•
Install the FS Toolbox application from the USB drive or download it from the
website.
•
Use the FS Toolbox application to find the BACnet Router, change the IP Address details (if
required) and launch the Web App (by clicking the Connect button).
+
button, or alternatively enter the Internet
Page 10 of 32
BACnet Router Start-up Guide
Sierra Monitor