Goddess RSC 085 GW8S Instruction Manual page 39

8. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
9. Unscrew and remove the
bottom hinge pin, turn the
bracket over and replace
it.
10. Refit the bracket fitting the bottom hinge pin. Replace both
adjustable feet.
11. Place the door back on. Ensure the door is aligned horizontally
and vertically, so that the seals are closed on all sides before
finally tightening the top hinge.
12. Put the top cover and fix it with 2 screws on the back.
unscrew
ENG - 39
ENG
Note: remove this
screw if it presents.
screw