Prior To Using For The First Time; Switching On The Appliance For The First Time - Setting The Language; Setting The Time - Electrolux Swissline SL EWF 1680 User Information

Prior to using for the first time

Switching on the appliance for the first time - setting
the language
The display is set to German as standard in the factory.
3
Important: If the display does not show the menu for setting the language
when the appliance is switched on, the appliance has been switched on be-
fore. If this happens, please see the section "Setup/Language".
To switch on the appliance, turn the program knob to any program,
e. g. COTTONS.
The display lights up and should
look like the illustration opposite.
In addition the display shows:
– "Bestätigen durch Taste OK"
– "Ändern durch Taste OPTION"
If you want to keep the lan-
guage:
Press the OK key.
If you want to change the lan-
guage:
1. Press the OPTION key repeat-
edly, until the desired language
appears in the display, e. g.
ENGLISH.
2. Press the OK key.
In the display ENGLISH flashes
several times and the display
should then look like e.g. the illus-
tration opposite.
3. To switch the appliance off, turn
the programme knob to OFF.

Setting the time

So that the time and the end of the program are correctly displayed, please
check the display and set the current time if necessary. To do this, please
see the section "Setup/Clock".
Sprache:
DEUTSCH
aýýýýýaýaýaýaýBýaýaýaýa
TEMP. C° U/MIN.
TEMP. C° T/MIN.
Language
ENGLISH
aýýýýýaýaýaýaýBýaýaýaýa
TEMP. C° U/MIN.
TEMP. C° T/MIN.
COTTON
Cycle end at
95C1600 aýýýýýaýaýaýaýaýaýaýaýa
TEMP. C° U/MIN.
TEMP. C° T/MIN.
OPTION OK
OPTIONS OK
OPTION OK
OPTIONS OK
12.45
15.05
OPTION OK
OPTIONS OK
ZEIT
TEMPS
ZEIT
TEMPS
ZEIT
TEMPS
11