Table of Contents
Advertisement
If RINSE HOLD
After a RINSE HOLD or when a program with NIGHT CYCLE has ended, the
START/PAUSE indicator flashes. "Cycle ended" and "Door locked" appear
alternately in the display.
The water must first be drained:
– Turn the programme knob to OFF, then to DRAIN and press the START/
PAUSE key (the water is drained without spinning),
or
– or turn the programme knob to OFF and then to SPIN. Change the spin
speed if necessary and press the START/PAUSE key (the water is drained
and the washing spun).
Setup
The special functions that can be set under Setup remain permanently
stored independent of each washing cycle – even after the appliance has
been switched off or the mains plug has been removed from the socket.
Memory 1, 2, 3
Program combinations can be stored at program knob positions MEMORY
1, 2, 3 and can then be selected directly using the program knob. To do this
the desired program combination is first put together and then stored.
Setting the Memory
Example: Program position ME-
MORY 1 is to be given the follow-
ing program combination: LINEN/
EASY-CARES 40 °C, 800 rpm,
with PREWASH.
1. Turn the program knob to LI-
NEN/EASY-CARES.
2. Press the TEMP. key repeated-
ly, until 40 °C appears in the display.
3. Press the RPM key repeatedly, until 800 appears in the display.
4. Using the OPTION key set
bar appears under the PREWASH symbol
5. Press the OPTION key repeatedly, until the SETUP symbol
20
or NIGHT CYCLE
LINEN/EASY CARE
Cycle end at
40C 800 aýýýýýVýaýaýaýaýaýaýaýa
PREWASH and press the OK key. A black
was selected:
TEMP. C°
OPTION
U/MIN.
TEMP. C°
T/MIN.
OPTIONS
.
12.45
14.37
OK
ZEIT
OK
TEMPS
flashes.
Advertisement
Table of Contents
