Before First Use; Daily Use - Electrolux EW6F6448M5 User Manual

If the procedure does not work (due to
timeout, wrong programme dial position
or wrong keys combination), switch the
appliance off and repeat sequence from
the beginning.
10.4 Factory Reset
This function allows to restore the factory
default options. To activate this option follow
steps below:
1. Switch the appliance on by pressing
On/Off button.
2. Turn the programme knob to the
Synthetics programme (3rd position
clockwise).

11. BEFORE FIRST USE

1. Make sure that the electrical power is
available and the water tap is open.
2. Pour a small quantity of detergent into the
compartment marked by
3. Set and start a programme for cotton at
the highest temperature without any
laundry in the drum.

12. DAILY USE

WARNING!
Refer to Safety chapters.
12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
A short tune sounds.
12.2 Loading the laundry
1. Open the appliance door.
2. Empty the pockets and unfold the items
before you put them in the appliance.
3. Put the laundry in the drum, one item at a
time.
Do not put too much laundry in the drum.
22 ENGLISH
3. Press and hold the Prewash and Stain
4. The display will show
If the procedure does not work (due to
timeout, wrong programme dial position
or wrong keys combination), switch the
appliance off and repeat sequence from
the beginning.
This removes all possible dirt from the drum
and the tub.
.
4. Close the door firmly.
buttons for some seconds (within 10
seconds after the switching on. After
these 10 seconds, the key combination
activates and deactivates the acoustic
signals).
seconds.
for about 5