Table of Contents
Advertisement
Figure 25. Moving the Supply Reel Motor.
8. Ensure that the tape is fully retracted into the cartridge.
9. Unload the tape cartridge by doing the following:
a. At the left front of the drive, insert a 2.5-mm L-Hex wrench into the hole marked UNLOAD ( 1 in Figure 26).
b. Turn the wrench in the direction marked on the drive (counterclockwise) until the tape ejects.
7208 Tape Drive Service Guide
Manually Removing a Tape Cartridge
All manuals and user guides at all-guides.com
The drive is turned upside down.
¦ Copyright IBM Corp. 1998
4.6 - 3
Advertisement
Table of Contents
