Subscribe to Our Youtube Channel
Related Manuals for Surveon CAM2200
Summary of Contents for Surveon CAM2200
- Page 1 CAM2200/CAM2400 Megapixel Box Indoor Network Camera Hardware Manual Release 1.1 April, 2010...
- Page 3 Product specifications are also subject to change without notice. Trademarks Surveon and Surveon logo are trademarks of Surveon Technology Inc. Other names prefixed with “NVR” are trademarks of Surveon Technology Inc. All other names, brands, products or services are trademarks or registered...
-
Page 4: Table Of Contents
Table of Contents Copyright Statement................I Table of Contents ................II Safety Precautions ................III Device Site Recommendations..............III Regulatory Compliance Information ............IV Chapter 1. Product Overview .............. 1 1.1. Package Contents ..............1 1.2. Features and Benefits..............2 Chapter 2. Hardware Overview ............3 2.1. -
Page 5: Safety Precautions
Safety Precautions Electric Shock Warning This equipment may cause electric shocks if not handled properly. Access to this equipment should only be granted to trained operators and maintenance personnel who have been instructed of, and fully understand the possible hazardous conditions and the consequences of accessing non-field-serviceable units such as the power supplies. -
Page 6: Regulatory Compliance Information
Regulatory Compliance Information Regulatory Compliance Information FCC/CE Class A IEC 60950 Shown below is the location of the compliance statement label. (applies in the U.S. and Canada) FCC Class A Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules (47 CFR, Part 2, Part 15 and CISPR PUB. - Page 7 For Power Supplies’ compatibility to China Compulsory Certification. Surveon is committed to being properly prepared and taking all the necessary steps that will result in our compliance with the new European directive, RoHS (2002/95/EC), on or before the specific dates set forth in those applicable laws and regulations.
-
Page 9: Chapter 1. Product Overview
Chapter 1. Product Overview 1.1. Package Contents Surveon Network Camera Hardware Manual... -
Page 10: Features And Benefits
Surveon CAM2200/CAM2400 1.2. Features and Benefits This IP device is a cutting-edge digital video transmission device. It can compress and transmit real-time images of outstanding quality using a reasonable amount of bandwidth through a standard TCP/IP network. The following features make this IP camera an outstanding choice when building... -
Page 11: Chapter 2. Hardware Overview
Chapter 2. Hardware Overview 2.1. Front View S tatus LED indi cator Microphone 2.2. Rear View CAM 2200 Surveon Network Camera Hardware Manual... -
Page 12: Cam 2400
Surveon CAM2200/CAM2400 CAM 2400 2.3. Dimensions www.surveon.com... -
Page 13: Functions
PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state changes and the input becomes active (shown under Event Configuration > Port Status). Auxiliary power and GND Surveon Network Camera Hardware Manual... - Page 14 Surveon CAM2200/CAM2400 Ground Description Electrically connected in Voltage: 12V Auxiliar parallel with the y DC connector for the power Max: 1.2W supply, this pin provides Power an auxiliary connector for (not to main power to the unit. power This pin can also be used...
- Page 15 Flashes every 0.2 sec during firmware upgrade. Amber (On:0.2 sec, Off: 0.2 sec) Note: Startup or reboot may have failed if the status LED shows steady amber for over 1 minute. Unlit No network connection. Surveon Network Camera Hardware Manual...
-
Page 16: Chapter 3. Troubleshooting
Surveon CAM2200/CAM2400 Chapter 3. Troubleshooting 3.1. Checking Firmware Version Connect to the camera through a web browser. Firmware version information will be under System > System Status > Firmware version. 3.2. Upgrading Firmware Upgrading with a firmware file on a PC: Power ON the device. -
Page 17: Emergency Recovery Procedure
(including the IP address) to be reset. To reset the unit without changing parameters, disconnect and reconnect the power adapter. To check for updated information on your camera, or for any other questions, please refer to http://www.surveontech.com/support/faq.asp or contact technical support at support@surveontech.com. Surveon Network Camera Hardware Manual... -
Page 18: Chapter 4. Technical Specifications
Surveon CAM2200/CAM2400 Chapter 4. Technical Specifications CAM2200 CAM2400 1/3” 1.25 megapixel 1/3” 1.3 megapixel Image sensor progressive scan progressive scan CMOS SONY EXviewHAD CCD Lens Changeable (CS/C mount) Day/Night Color: 0.5 lux; B/W: 0.05 lux Min illumination 1 lux @ F1.0, 2856K @ F1.0, 2856K... - Page 19 Max. 7W without AUX Power consumption Dimension 75mm x 58mm x 150mm (2.95" x 2.28' x 5.9") (WxHxD) Net: 385g (0.88 lb) Net: 450g (0.99 lb) Weight Gross 1035g (2.29 lb) Gross: 1085g (2.4 lb) Certification FCC, CE, UL Surveon Network Camera Hardware Manual...
Need help?
Do you have a question about the CAM2200 and is the answer not in the manual?
Questions and answers