Table of Contents
Advertisement
LAN unit
You can connect to a LAN (Local Area Network) with the 100 Base-TX/10 Base-T
LAN unit on your computer. To activate the LAN unit, perform the following steps.
Use a category 3 or a category 5 LAN cable when connecting to 10
BASE-T LAN, and the category 5 when connecting to 100 BASE-TX LAN.
Connect your computer to LAN
1.
Turn off the computer.
2.
Attach the provided core to one end of your LAN cable. Insert the cable into the
core and put the core around your LAN cable; then, close the core until it clicks.
5
3.
Remove the cover of the LAN jack on the rear side of your computer.
5-4
Core
LAN Jack
Advertisement
Table of Contents
