Table of Contents
Advertisement
LAN unit
You can use the LAN unit for data transfer and communications over a local area
network.
Connecting the computer to a local area network
Connect your computer to a local area network as follows:
1.
Turn off your computer.
2. Locate the LAN jack on the rear edge of your computer.
3.
If your computer is provided with the LAN cable, go to the step 5. If with the
core for a LAN cable, go to the next step.
4.
Attach the provided core to one end of your LAN cable. Insert the cable into the
5
core and put the cable around the core; then, close the core until it clicks.
5. Plug the core end of the LAN cable into the LAN jack of your computer
6.
Plug the other end of the cable into a network hub or another computer.
7.
Turn on your computer.
•
5-4
LAN jack
If your computer is provided with the LAN cable, always use that
cable. If with the core for a LAN cable, make sure to attach the
provided core to your LAN cable before use.
Advertisement
Table of Contents
