Table of Contents
Advertisement
USB Device
Your computer has an interface called Universal Serial Bus (USB) and its four USB
ports supporting USB 1.1 and USB 2.0. With a USB connection, you can connect/
disconnect peripherals to/from the ports without turning off the computer. Generally,
when you connect a device to the computer, the necessary driver will be installed
automatically. See also the manuals of peripheral devices supporting USB.
When a new device is correctly connected to the computer, the
appropriate driver is automatically installed. If the driver is not installed
correctly, you will see the message in the lower right of the screen. In this
case, install the driver by following the instructions on the screen.
4
To remove USB devices, you may need to perform the following before you remove
them:
1.
Click Safely Remove Hardware icon (
icon, click
Step 3.
2.
Click on Safely remove xxxxxxx string you want to removre (xxxxxxx is the name
of the USB device); then, Safe To Remove Hardware dialog appears.
3.
Remove the USB cable from the computer.
When you click on the string for the SD card slot and the SmartMedia
card slot, shown by Safely remove USB Mass Storage Device- Drives
(X:,X:), a warning message appears and you cannot remove the slots. (X
is a drive letter of the SD card slot or the SmartMedia card slot. Confirm
the drive letters of the both slots by opening My Computer window.)
4-8
USB Ports
to show all kinds of icons. If the icon does not appear, go to
) on the taskbar. If you cannot find the
Advertisement
Table of Contents
